10.5.7 Is Up

Frodo · Post by **Frodo** » Wed May 13, 2009 10:45 am

stephentayler wrote:I have a problem with Eucontrol 1.3.0, which I had successfully loaded prior to updating from 10.5.6 to 10.5.7 ...... now my MCMix isn't recognised. I don't know if any of you have Eucontrol 1.2.5 working happily??

Otherwise everything seems zippy, especially opening and closing.

Cheers

Stephen

I was encouraged by your Eucon 1.3.0 report recently, but I suppose some OS updates can alter the way it accepts or retains install info or even maintains permissions. That has happened to me with other drivers and plugins in 10.5.6 and earlier. In most cases I just reinstalled whatever was disappearing. In one case a certain developer had to release a fix.

twistedtom · Post by **twistedtom** » Thu May 14, 2009 12:59 am

Tim wrote:Let's get Mikey to try it.

Mickey committed suicide; he got tiered of life!

I will need to read about it before I try the update, it would be cool if it fixed the MIDI drag and drop problem.

mlehmann · Post by **mlehmann** » Thu May 14, 2009 6:53 am

Patch for Euphonix is released: http://euphonix.com/artist/support/downloads.php

v 1.3.1 is ok with 10.5.7

stephentayler · Post by **stephentayler** » Thu May 14, 2009 7:39 am

Yes, all is well again in Eucon land!!!

So now everything feels much more responsive.

Warmest regards

Stephen

nick danger · Post by **nick danger** » Thu May 14, 2009 7:43 am

So is this the final update to Leopard? If so, does that mean DP 6.03 is not far behind, with DP 7 coming sometime after the release of Snow Leopard?

Phil O · Post by **Phil O** » Thu May 14, 2009 8:17 am

Installed 10.5.7 on a partition. I'm having absolutely no problems with it. I'm ready to install on my main drive!

Phil

twistedtom · Post by **twistedtom** » Thu May 14, 2009 11:29 am

nick danger wrote:So is this the final update to Leopard? If so, does that mean DP 6.03 is not far behind, with DP 7 coming sometime after the release of Snow Leopard?

Yes DP6.03.1 will be out next week and Dp 7 will be out in the spring.

YouTube · Post by **James Steele** » Thu May 14, 2009 11:32 am

stephentayler wrote:I have a problem with Eucontrol 1.3.0, which I had successfully loaded prior to updating from 10.5.6 to 10.5.7 ...... now my MCMix isn't recognised. I don't know if any of you have Eucontrol 1.2.5 working happily??

Otherwise everything seems zippy, especially opening and closing.

Cheers

Stephen

Apparently Euphonix released 1.3.1 already which fixes the problems with 10.5.7.

I just wish I could go back to Leopard at all. If someone could tell me if DP6/PPC/10.5.7 might work with FM7/FM8 or most importantly Kontakt Player 2, I'd appreciate it!

MIDI Life Crisis · Post by **MIDI Life Crisis** » Thu May 14, 2009 12:01 pm

James Steele wrote:If someone could tell me if DP6/PPC/10.5.7 might work with FM7/FM8 or most importantly Kontakt Player 2, I'd appreciate it!

Just tried it, James, and no go on the K2 player. K3 works fine. I do believe the K2 player is probably a dead issue over at MOTU. I'm guessing they might not care as much as the easy fix is using the K3 player. Maybe if they had spare time to look at it, but there is probably a lot more to do in terms of fixing code.

I don't have FM7/FM8.

dbender · Post by **dbender** » Thu May 14, 2009 1:13 pm

MIDI Life Crisis wrote:
James Steele wrote:If someone could tell me if DP6/PPC/10.5.7 might work with FM7/FM8 or most importantly Kontakt Player 2, I'd appreciate it!
Just tried it, James, and no go on the K2 player. K3 works fine. I do believe the K2 player is probably a dead issue over at MOTU. I'm guessing they might not care as much as the easy fix is using the K3 player. Maybe if they had spare time to look at it, but there is probably a lot more to do in terms of fixing code.

I don't have FM7/FM8.

Just want to confirm, is that on a PPC or Intel (your sig says latest mac stuff so seems that it's w/ Intel too, not just PPC)

MIDI Life Crisis · Post by **MIDI Life Crisis** » Thu May 14, 2009 2:28 pm

dbender wrote:
Just want to confirm, is that on a PPC or Intel (your sig says latest mac stuff so seems that it's w/ Intel too, not just PPC)

My sig:

DP 6.02, all current Mac OS stuff, Dual 2.0 PPC G5, 4GB RAM. MachFive 2, MX4, Kontakt 3, Korg Legacy, GPO, Finale

dbender · Post by **dbender** » Thu May 14, 2009 2:59 pm

MIDI Life Crisis wrote:
dbender wrote:
Just want to confirm, is that on a PPC or Intel (your sig says latest mac stuff so seems that it's w/ Intel too, not just PPC)
My sig:

DP 6.02, all current Mac OS stuff, Dual 2.0 PPC G5, 4GB RAM. MachFive 2, MX4, Kontakt 3, Korg Legacy, GPO, Finale

thanks...missed that.....thanks

MIDI Life Crisis · Post by **MIDI Life Crisis** » Thu May 14, 2009 3:09 pm

dbender wrote: thanks...missed that.....thanks

I'd like to miss it in place of a new machine, but alas, other priorities prevail...

bayswater · Post by **bayswater** » Thu May 14, 2009 4:31 pm

MIDI Life Crisis wrote: My sig:
DP 6.02, all current Mac OS stuff, Dual 2.0 PPC G5, 4GB RAM. MachFive 2, MX4, Kontakt 3, Korg Legacy, GPO, Finale

Is your G5 the April / May 2005 model with the PCI bus ?(not PCI-x, etc.) Looks a lot like my setup but I've stayed at 10.4.11 because Waves 4 wouldn't work on 10.5. I've WUP'd to 6, so if Korg, GPO, UAD works ... I can catch up

MIDI Life Crisis · Post by **MIDI Life Crisis** » Thu May 14, 2009 5:27 pm

bayswater wrote:
MIDI Life Crisis wrote: My sig:
DP 6.02, all current Mac OS stuff, Dual 2.0 PPC G5, 4GB RAM. MachFive 2, MX4, Kontakt 3, Korg Legacy, GPO, Finale
Is your G5 the April / May 2005 model with the PCI bus ?(not PCI-x, etc.) Looks a lot like my setup but I've stayed at 10.4.11 because Waves 4 wouldn't work on 10.5. I've WUP'd to 6, so if Korg, GPO, UAD works ... I can catch up

How can I tell? I won it from Macworld so didn't make an 'informed' decision.

MOTUnation.com

10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up

Re: 10.5.7 Is Up