DP loses VI's on new Projects

denne · Post by **denne** » Wed May 24, 2006 12:35 pm

Hi there

this is weird: I opend a new Project, added a VI (dfhs in this case) DP created the instrument-track with the "drummer"-plug on the A-insert, but when I doubleclick "drummer" only the small titlebar of the window pops up, but no dfhs-GUI. same with battery and GPO. I opened then older Projects with instrument tracks - everything's fine there. trashed prefs&repaired permissions but no go on new Projects.

any clues?

thx

G5 2x1.8_OSX.3.9_DP4.61

billf · Post by **billf** » Wed May 24, 2006 12:39 pm

Are the track outputs enabled?

Don T · Post by **Don T** » Wed May 24, 2006 12:43 pm

Hello,
Yes, We have been experiencing that same thing. When we open a saved project the motu VI's sometimes come up as "missing instrument" as it is loading. It opens normal after a full reboot.
We have been having various problems (my Scale Time thread).

denne · Post by **denne** » Wed May 24, 2006 12:47 pm

jeeeezzz I feel like such a f idiot

that was a blind spot as big as mommas butt. thanks a zillion for nursing

denne · Post by **denne** » Wed May 24, 2006 12:48 pm

the track wasn't enabled ....er

chrispick · Post by **chrispick** » Wed May 24, 2006 12:54 pm

Happens to the best of us, man.

matwell · Post by **matwell** » Wed May 24, 2006 3:19 pm

This will also happen if you have a [stereo] only VI bussed to a mono Audio Track (for printing). If you save and close your project like this, the next time you open it, the VI will not load, and you will lose your VI settings.