Sequoia and USB Issues

Macintosh software/hardware discussion and troubleshooting

Moderator: James Steele

User avatar
Rick Cornish
Posts: 1261
Joined: Sun Feb 17, 2013 9:07 pm
Primary DAW OS: MacOS
Location: Ely, MN USA
Contact:

Re: Sequoia and USB Issues

Post by Rick Cornish »

CharlzS wrote:Don't know if related, but had difficulty with drive not being recognized. Found a suggestion somewhere (maybe here) to change setting System Settings --> Privacy and Security --> Accessories --> Allow Accessories to Connect to "Ask for New Accessories". Disconnected the device, changed the setting, restarted, plugged in drive and responded to prompt. I have not had issue since.
Thanks, CharlzS, I’ll check it out


Sent from my iPhone using Tapatalk Pro
Rick Cornish

DP 11 on M2 Mac Studio (64gB mem. + 2tB int. SSD + two 2tB ext. SSDs). VIs from MOTU, Spectrasonics, NI, UVI, 8dio, Soniccouture, East West, Spitfire, Heavyocity, Vir2, and more; plus Waves 14, Brainworx, iZotope, Wavesfactory, Oeksound, Final Mix, JST, SPL, PSP, UVI, Valhalla DSP, and other FX plugs, Roland A-88, Apogee Quartet, iCON Platform Nano, Genelec 1032a and Westlake BBSM4 monitors, Gibson HR Fusion III. rickcornish.net
User avatar
stubbsonic
Posts: 5149
Joined: Fri Dec 22, 2006 12:56 pm
Primary DAW OS: MacOS
Contact:

Re: Sequoia and USB Issues

Post by stubbsonic »

CharlzS wrote: Tue Apr 22, 2025 3:18 am Don't know if related, but had difficulty with drive not being recognized. Found a suggestion somewhere (maybe here) to change setting System Settings --> Privacy and Security --> Accessories --> Allow Accessories to Connect to "Ask for New Accessories".
There is an option to ALWAYS allow. Since my laptop is lives at home and rarely goes with me; is there any reason not to use "always"?
M1 MBP; OS 15.3, FF800, DP 11.33, PC3K7, K2661, iPad6, Godin XTSA (w/ SY-1000), 2 Ibanez 5-string basses (1 fretted, 1 fretless), FX galore

http://www.jonstubbsmusic.com
User avatar
Rick Cornish
Posts: 1261
Joined: Sun Feb 17, 2013 9:07 pm
Primary DAW OS: MacOS
Location: Ely, MN USA
Contact:

Re: Sequoia and USB Issues

Post by Rick Cornish »

CharlzS wrote: Tue Apr 22, 2025 3:18 am Don't know if related, but had difficulty with drive not being recognized. Found a suggestion somewhere (maybe here) to change setting System Settings --> Privacy and Security --> Accessories --> Allow Accessories to Connect to "Ask for New Accessories". Disconnected the device, changed the setting, restarted, plugged in drive and responded to prompt. I have not had issue since.
On my system (in Sequoia) there's no menu option for "Accessories" under Privacy & Security. I didn't find Quartet under any of the dozen or so other categories, though I did find Apogee Control 2 (the controller app for Quartet) in the Microphone menu and it was enabled.
Rick Cornish

DP 11 on M2 Mac Studio (64gB mem. + 2tB int. SSD + two 2tB ext. SSDs). VIs from MOTU, Spectrasonics, NI, UVI, 8dio, Soniccouture, East West, Spitfire, Heavyocity, Vir2, and more; plus Waves 14, Brainworx, iZotope, Wavesfactory, Oeksound, Final Mix, JST, SPL, PSP, UVI, Valhalla DSP, and other FX plugs, Roland A-88, Apogee Quartet, iCON Platform Nano, Genelec 1032a and Westlake BBSM4 monitors, Gibson HR Fusion III. rickcornish.net
User avatar
CharlzS
Posts: 835
Joined: Sun Jan 27, 2019 9:07 am
Primary DAW OS: Windows

Re: Sequoia and USB Issues

Post by CharlzS »

stubbsonic wrote: Tue Apr 22, 2025 7:58 am
CharlzS wrote: Tue Apr 22, 2025 3:18 am Don't know if related, but had difficulty with drive not being recognized. Found a suggestion somewhere (maybe here) to change setting System Settings --> Privacy and Security --> Accessories --> Allow Accessories to Connect to "Ask for New Accessories".
There is an option to ALWAYS allow. Since my laptop is lives at home and rarely goes with me; is there any reason not to use "always"?
Mine was set to "Always" and the thread that I found said to change that - there might be some issue with the Always setting.
DP 11.34 PT 2024.10.2 Mixbus 11 VEP 7.x with various VIs
NI Komplete Audio 6 on HP Envy 8G i7 Quad Laptop Win11
MOTU 828es ADA8200 MTP-AV on HP Z2 G4 Xeon Workstation Win11
MOTU M4 on MacBook Air M2 2023 Sequoia.4.1
User avatar
CharlzS
Posts: 835
Joined: Sun Jan 27, 2019 9:07 am
Primary DAW OS: Windows

Re: Sequoia and USB Issues

Post by CharlzS »

Rick Cornish wrote: Tue Apr 22, 2025 8:15 am On my system (in Sequoia) there's no menu option for "Accessories" under Privacy & Security. I didn't find Quartet under any of the dozen or so other categories, though I did find Apogee Control 2 (the controller app for Quartet) in the Microphone menu and it was enabled.
Maybe it's just a laptop thing? It's at the bottom of my Privacy and Security settings after FileVault.
DP 11.34 PT 2024.10.2 Mixbus 11 VEP 7.x with various VIs
NI Komplete Audio 6 on HP Envy 8G i7 Quad Laptop Win11
MOTU 828es ADA8200 MTP-AV on HP Z2 G4 Xeon Workstation Win11
MOTU M4 on MacBook Air M2 2023 Sequoia.4.1
User avatar
Rick Cornish
Posts: 1261
Joined: Sun Feb 17, 2013 9:07 pm
Primary DAW OS: MacOS
Location: Ely, MN USA
Contact:

Re: Sequoia and USB Issues

Post by Rick Cornish »

CharlzS wrote: Tue Apr 22, 2025 10:52 am Maybe it's just a laptop thing? It's at the bottom of my Privacy and Security settings after FileVault.
You are correct, sir!

Security settings from my MacBook Pro…
Screenshot 2025-04-22 at 1.12.04 PM.png
Screenshot 2025-04-22 at 1.12.04 PM.png (64.5 KiB) Viewed 737 times


And from my Mac Studio…
Attachments
Screenshot 2025-04-22 at 1.11.31 PM.png
Screenshot 2025-04-22 at 1.11.31 PM.png (58.31 KiB) Viewed 737 times
Rick Cornish

DP 11 on M2 Mac Studio (64gB mem. + 2tB int. SSD + two 2tB ext. SSDs). VIs from MOTU, Spectrasonics, NI, UVI, 8dio, Soniccouture, East West, Spitfire, Heavyocity, Vir2, and more; plus Waves 14, Brainworx, iZotope, Wavesfactory, Oeksound, Final Mix, JST, SPL, PSP, UVI, Valhalla DSP, and other FX plugs, Roland A-88, Apogee Quartet, iCON Platform Nano, Genelec 1032a and Westlake BBSM4 monitors, Gibson HR Fusion III. rickcornish.net
User avatar
stubbsonic
Posts: 5149
Joined: Fri Dec 22, 2006 12:56 pm
Primary DAW OS: MacOS
Contact:

Re: Sequoia and USB Issues

Post by stubbsonic »

As an aside, it was always annoying to me that Mac OS might prevent me from opening a newly installed app-- UNLESS I knew the "cheat code" which is to right-click and choose open from the contextual menu. Now Mac OS has replace this with a new cheat code: go to System Settings/Security & Privacy and scroll to the bottom and choose open anyway.

Me: "Um, so you won't let me. ... but you will let me, if I know the secret ways."
M1 MBP; OS 15.3, FF800, DP 11.33, PC3K7, K2661, iPad6, Godin XTSA (w/ SY-1000), 2 Ibanez 5-string basses (1 fretted, 1 fretless), FX galore

http://www.jonstubbsmusic.com
User avatar
Rick Cornish
Posts: 1261
Joined: Sun Feb 17, 2013 9:07 pm
Primary DAW OS: MacOS
Location: Ely, MN USA
Contact:

Re: Sequoia and USB Issues

Post by Rick Cornish »

stubbsonic wrote: Wed Apr 23, 2025 7:56 am As an aside, it was always annoying to me that Mac OS might prevent me from opening a newly installed app-- UNLESS I knew the "cheat code" which is to right-click and choose open from the contextual menu. Now Mac OS has replace this with a new cheat code: go to System Settings/Security & Privacy and scroll to the bottom and choose open anyway.

Me: "Um, so you won't let me. ... but you will let me, if I know the secret ways."
In this case, "the secret way" is to unplug the usb cable from the back of my interface and plug it back in again.
Rick Cornish

DP 11 on M2 Mac Studio (64gB mem. + 2tB int. SSD + two 2tB ext. SSDs). VIs from MOTU, Spectrasonics, NI, UVI, 8dio, Soniccouture, East West, Spitfire, Heavyocity, Vir2, and more; plus Waves 14, Brainworx, iZotope, Wavesfactory, Oeksound, Final Mix, JST, SPL, PSP, UVI, Valhalla DSP, and other FX plugs, Roland A-88, Apogee Quartet, iCON Platform Nano, Genelec 1032a and Westlake BBSM4 monitors, Gibson HR Fusion III. rickcornish.net
Post Reply