Recording at 192k/24

stewartadam · Post by **stewartadam** » Sat Jun 13, 2009 4:16 am

Hello

I have to transfer old recordings at 192k/24 bit rez. I have 2 896HD's and a Lucid clock. when I use Logic or any other program to record into I can see the meters moving and the material gets recorded but I can not hear anything coming out of the monitors. If I playback at 96k (1/2 speed) audio comes through the monitors (at 1/2 speed). I don't understand why I can not hear anything at 192K. Does any one have an explanation for this

Thank you

1nput0utput · Post by **1nput0utput** » Tue Jun 16, 2009 6:25 am

Which 896HD outputs are you using for monitoring? According to the manual, the main outputs mirror the headphones output at 4X sample rates. That's probably why you're not hearing anything. Track outputs in Logic are set to Output 1-2, which corresponds to analog 1-2 at 4X SRs.

Dwetmaster · Post by **Dwetmaster** » Tue Jun 16, 2009 7:31 am

I'm not sure cue mix works @ 192khz...

1nput0utput · Post by **1nput0utput** » Tue Jun 16, 2009 3:28 pm

Dwetmaster wrote:I'm not sure cue mix works @ 192khz...

Yes, it does. But I don't think this has anything to do with CueMix.

stewartadam · Post by **stewartadam** » Tue Jun 16, 2009 4:16 pm

Hi

I am using the Main mix outs, L-R XLR outs

Thanks
Stewart

MOTUnation.com

Recording at 192k/24

Recording at 192k/24

Re: Recording at 192k/24

Re: Recording at 192k/24

Re: Recording at 192k/24

Re: Recording at 192k/24