MOTUnation.com

Thank you very much Marcus, the issue is, thanks to your excellent advice resolved for now !

I will have a very good look at DP !

Cheers

Simon

Hey, I have one of my FW 828 mk IIs hooked up to a MacBookPro running Leopard (with the latest MOTU drivers etc) and when running either logic 7.2 or 8 pro I get the above message after about 4 seconds of recording. I also get it during playback. I have tried resetting the 828 to factory defaults an...

yep, I have a button on the back of the ADAT card for external synch !

Thanks

Simon

Im going to presume that the clock coming out of the BNC word out is the same as whatever the 828 is slaved to. Example, I have both my 828s slaved to the Mac internal clock however I want to use my octopre and interface it with the 828s via ADAT. So, I set the 828s to clock off the Mac and run a 75...

If you have an 828 synched to an external clock source via a firewire bus, where does the clock source come from outputted from the BNC word clock out ?

Thanks
Simon

FWIW I have two 828s on the same FW bus and I run the out put form the second one into the first via S/PDIF for monitoring purposes. I have had no problem with overloading the firewire bus even recording 18 ch @ 24/96 I have recently also had clock issues and eventually solved them by changing the w...

I have just synched both 828s to the Mac Internal Clock and unless I can use the BNC out on the first MOTU to channel the synck from the Mac up to the octopre externally, the whole ADAT thing will just have to wait !

Would this work ?

Hi folks, really dumb question #324 How do I synch the audio clock in Logic to my 828s ? I have my first 828 set as the clock master for the second and was running an octopre via ADAT light pipe synched to the first 828 via the external BNC word clock. That said I was still getting artifacts that so...

2x2.5 GHz G5 3GB RAM running OSX 10.4.7 into Logic Pro 7.2

1.4.1 MOTU drivers

yep. I clock everything to 282 #1. I have an octopre connected to two 828s @ 24/96, I clock the Octopre to the first 828 via the word out of the first 828 (using a BNC cable) and then clock the second 828 to the first via firewire. The computer is them clocked to the first 828 via the audio setup pr...

Thanks folks, very interesting and informative discussion !

Im using Logic 7.2 at the mo, I'm not heavily in to the whole MIDI thing but really like all the plugins.

How well does Logic Pro compare with DP ?

I do this using a S/Pdif cable form one to tother and then clock everything form the first 828 (inc an octopre via the word clock out with a BNC cable). Works really well

I did last weekend, sounded great.

I used two TRS cables from a Korg and kept the trim right down.

I will give that a go, thanks mate !