MOTUnation.com

Are there any VIs or plugins installed in the project. These are the culprit 99% of the time. Especially Sampletank or SonikSynth2. Remove these components to open this project if this is the case. There are known issues w/ DP4.6 and Sampletank 2 XL and SonikSynth2. Seems to be only the XL versions ...

That is what I do. There are benefits to the PT way where automation stays attache to the soundbite, and benefits to the DP way where it stays where it is in the timeline whether you move the audio piece or not. The prob with the PT way is that if you move audio, it may not requre the same mix param...

I'm a mixerless guy, but I only run a writing/project studio. Using outboard gear such as verbs (which I do) is easy since time align is less crucial. It becomes a much bigger issue with compressers, eq's etc. Combine that with rigging your cue sends for headphones or verb while tracking etc., and t...

My lengthy and exhaustive research has found LE versions to work but not XL. I have tried all posted "fixes" but no dice on OSX 10.4.2. Had to go back to DP 4.52. And, as stated above, it still failed in 4.52 after installing 4.6. Had to trash DP and ST and SS and re-install it all for a w...

What about the one from Wave Arts? Can't remember the name, but it is a copy of the L1.

Assuming all your soundbites have the same start point...(if not; merge them with a start marker so that they do)......Set the tempo of your sequence to 100. Select all soundbites and "Set Soundbite Tempo" to 100bpm. Now change the sequence tempo to 90 (and all the vertical red lines will ...

Yes it is normal. As soon as the rewire chain is broken, it shuts down. Save your kit early and often.

CROYAL--- I have a template setup that has the outputs of my 828 named as to what device they are feeding (ie. Quadraverb2) and the inputs named as what device they are returning from (ie Q2 Return) Then, in my sends, I can select this to send audio from any track directly to this reverb just like a...

I use many external FX. Here is what I do I send all the outputs of all tracks and effects etc. directly to another aux. On this fader (which sort of becomes a master fader) I put any master compression or limiting. Then, on the aux send of this new aux(master fader), I send (at unity gain) to a bus...

Clearly there is a diffence between FREE and LE versions vs. the XL version or FULL version that is causing these problems for some users.

Did a fresh install of OS10.4.2 (complete wipe of the HD first), then installed DP4.5, and upgraded it to 4.6. Repeairing permissions every step of the way. Loaded ST XL 2.09, and had the same results as my other 2 G5 towers. The only difference is that the project containing an ainsance of ST XL 2....

Check your read and write buffer sizes. If the write size is too small, it would cause this meter to rise since it is a representation of the machine's ability to load ram with audio as it needs it. Don't forget, at 96k, each track is double the data of a 48k track. And going from 16 to 24 bit adds ...

Check your read and write buffer sizes. If the write size is too small, it would cause this meter to rise since it is a representation of the machine's ability to load ram with audio as it needs it. Don't forget, at 96k, each track is double the data of a 48k track. And going from 16 to 24 bit adds ...

Check your read and write buffer sizes. If the write size is too small, it would cause this meter to rise since it is a representation of the machine's ability to load ram with audio as it needs it. Don't forget, at 96k, each track is double the data of a 48k track. And going from 16 to 24 bit adds ...

Already tried it...On 2 separate systems...I noticed the above success story was again on OS 10.42. Maybe Tiger is the answer.