MOTUnation.com

Hi, Everyone,

I'm running the latest version of DP on my Mac Studio with and M2 Max processor. I usually use an 828ES, attached via Thunderbolt, as my output, and that works fine. But if I ever select my Studio Display Speakers or my Mac Studio speakers as the output instead, I get an emergency stop and the MOTU Audio System turns off. That happens no matter how many times I restart the machine or DP, or repeat the process.

I've tried this with a blank project with nothing recorded or routed anywhere with the same results.

I'd appreciate any advice or help.

Thanks,

Ed Rosenblatt
Maestro Productions, LLC

It sounds like DP might be detecting a feedback loop. When you select that as an output, do you have those same devices somehow selected as an input in the system audio setup? Just a shot in the dark here.

James Steele wrote: ↑Wed Jun 26, 2024 12:04 pm It sounds like DP might be detecting a feedback loop. When you select that as an output, do you have those same devices somehow selected as an input in the system audio setup? Just a shot in the dark here.

Detective Steele has posited a likely scenario.

Yes, Detective Steele has done it again. I am most grateful for the help and for MOTUNation.

Ed

edmaestro wrote: ↑Thu Jun 27, 2024 6:46 am Yes, Detective Steele has done it again. I am most grateful for the help and for MOTUNation.

Woohooo!! I think yesterday was about the best day had in years!! Watch for me to resume my slump for another few months!

James Steele wrote: ↑Thu Jun 27, 2024 11:42 am

edmaestro wrote: ↑Thu Jun 27, 2024 6:46 am Yes, Detective Steele has done it again. I am most grateful for the help and for MOTUNation.

Woohooo!! I think yesterday was about the best day had in years!! Watch for me to resume my slump for another few months!