micro lite setup

DJE Music · Post by **DJE Music** » Sat Sep 28, 2019 10:39 pm

Hi, first post;

I just bought a micro lite and am trying to set it up. I am running Win10, Studio One 4.5, and have the following externals: Keylab 61 MkII in port 1 (in/out), Roland JP-08 in output of port 2, and Alesis SR-18 in input of port 3. The Keylab is running all 16 channels, while the JP08 is on channel 2 and the SR-18 is on channel 3. I also have the Presonus Audiobox iTwo to set up with the micro lite (if necessary). I have good input from the Keylab and the SR-18; but I don't get any output to the JP-08. Here is my initial MIDI setup in Studio One

. Can anyone point me in the right direction to get these hardware pieces set up so they can talk back and forth to each other? Basically I want to be able to have the clock run from the Keylab OR Studio One AND be able to record both audio and MIDI signals from the JP-08 and SR-18.

Thanks in advance!