Motu Ultralite Hybrid - Input channels not showing in PT10

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
jasonmnash
Posts: 2
Joined: Mon Apr 09, 2012 11:49 am
Primary DAW OS: Unspecified

Motu Ultralite Hybrid - Input channels not showing in PT10

Post by jasonmnash »

Hi

I'm wondering if anyone can help. I've recently purchased Motu Ultralite Hybrid and Pro Tools 10.

When in Pro Tools selecting the input channel on an audio track, the only two channels available are mic input 1 & mic input 2. I cannot see any of the 1/4 inch jack sockets (channels 3 - 8). When i go to CueMix I can get the signal in and hear/monitor the sound. But it's in pro tools where these channels don't show.

Any advice much appreciated.

cheers

Jason
Top
torrentg
Posts: 528
Joined: Tue Oct 06, 2009 7:18 am
Primary DAW OS: Windows

Re: Motu Ultralite Hybrid - Input channels not showing in PT

Post by torrentg »

Hi,

I don't use Pro Tools. I use Cubase but it's the same concept I'm sure. You probably have to go to device setup or similar first, in ProTools, to set your available devices. Use MOTU ASIO selections.
Top
Post Reply

Return to “MOTU Hardware & Windows”