Page 1 of 1

Pops, Clicks over 44.1 khz!

Posted: Thu Jan 29, 2009 4:02 pm
by data__stitch
Like the title says, im getting pops and clicks at anything over 44.1 also audio seems to be pitched differently when listening over 44.1-like when im on youtube.

im using the motu 24 i/o with ableton. most my tracks are at around 20% cpu, if that has anything to do with it. im running two hard drives with amd phenom x4.

any suggestions? i would really like to have my sample rates higher than 44.1.

thanks.

Re: Pops, Clicks over 44.1 khz!

Posted: Tue Feb 03, 2009 9:17 pm
by VigilantSound
You cant change sample rates in the middle of a project, only at the beginning. if you recorded at 44.1 then played it back at 48 or 96 it will sound high pitched because its actually being played back faster 96 samples is twice as much data so it has to play it twice as fast.

Re: Pops, Clicks over 44.1 khz!

Posted: Wed Feb 04, 2009 2:11 pm
by data__stitch
and what about the pops and clicks? No matter what, if im over 44.1 and especially at 96, i get pops. Even when moving the mouse.

any ideas?

Re: Pops, Clicks over 44.1 khz!

Posted: Wed Feb 04, 2009 4:03 pm
by VigilantSound
What are your specs? tell everything, Motherboard, Ram, processor, firewire card, OS, EVERYTHING! :D

Also your sample buffer settings in your motu audio consule, lower settings like 128 or 96 will give you lower latency but may cause audio glitches(pops and squeals) higher settings like 768 or 1024 will give you better audio playback but much higher and more noticeable latency. So you got to find your happy medium.

Re: Pops, Clicks over 44.1 khz!

Posted: Thu Feb 05, 2009 2:53 pm
by data__stitch
Alright, here it goes.

Motherboard- MSI k9A2 Platinum
Ram- 2 gig Corsair dual channel 800 mhz
Cpu- AMD Phenomx4 Black
Interface- Motu 24 i/o with pci card
Latency- usually keep this at 512

im still having no luck, is a new clock in order here?

Re: Pops, Clicks over 44.1 khz!

Posted: Thu Feb 05, 2009 4:15 pm
by VigilantSound
If your only running one digital device an external clock may not help, check out http://www.lavryengineering.com/index_flash.html for more on this.

Also are you running xp or vista. Sweetwater.com has support doc on tweaking your system i would check this out and make sure your PC is giving all it can.

http://www.tweakhound.com/xp/xptweaks/supertweaks1.htm

http://www.sweetwater.com/sweetcare/ts/ ... rd=acronis
These are for XP

http://www.sweetwater.com/sweetcare/ts/ ... mizedfalse

Thats for VISTA

Do the tweaks and mess around with the buffer sizes and get back to us.

Re: Pops, Clicks over 44.1 khz!

Posted: Fri Feb 06, 2009 1:40 pm
by data__stitch
my system is tweaked pretty well, and has been, yet still having problems. By the way, im using xp.