urgent help needed
Moderator: James Steele
Forum rules
Here's where to talk about preamps, cables, microphones, monitors, etc.
Here's where to talk about preamps, cables, microphones, monitors, etc.
-
HLStudios
- Posts: 85
- Joined: Fri Oct 22, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Ecuador
- Contact:
urgent help needed
as many know, i just recently bought alot of equipment two of them which were MKIII and an Octopre. i was pretty sure i would be able to connect a mic to the octopre then use a d-sub 25 pin cable to a bank in the mk3 and have the eight individual inputs of the octopre right into mk3 and DP. since i dont have d at the moment i have been trying to use cuemix but apparently i get nothing. id like to know if this can be done (some have said i can) with out the use of the ADAT card and connect it optical. id like to use the TDIF inputs in motu's mk3.thanks
-
giles117
- Posts: 1215
- Joined: Sat Oct 16, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Henderson County
- Contact:
WOW very detailed...Not to be smart, but slow down....
the D-sub out of the octopre is Analog, not digital.....
Tdif = tascam DIGITAL interface
So yes you need the ADAT card.
the D-sub out of the octopre is Analog, not digital.....
Tdif = tascam DIGITAL interface
So yes you need the ADAT card.
DP 6.02
Quad 3.0 Ghz, 8.0 GB RAM, 2 - 1TB HD, 5 - 500GB HD's (RAID)
MOTU HD192, 2408mk3, Microlite, UAD-1, UAD-2, Powercore, Lavry Blue AD/DA convertor, LA-610
Euphonix MC Control
29 years in this business and counting.....Loving every minute of it.....
Quad 3.0 Ghz, 8.0 GB RAM, 2 - 1TB HD, 5 - 500GB HD's (RAID)
MOTU HD192, 2408mk3, Microlite, UAD-1, UAD-2, Powercore, Lavry Blue AD/DA convertor, LA-610
Euphonix MC Control
29 years in this business and counting.....Loving every minute of it.....