Stem mixes from Multiple Interfaces

Discussion of Digital Performer use, optimization, tips and techniques on MacOS.

Moderator: James Steele

Forum rules
This forum is for most discussion related to the use and optimization of Digital Performer [MacOS] and plug-ins as well as tips and techniques. It is NOT for troubleshooting technical issues, complaints, feature requests, or "Comparative DAW 101."
Post Reply
ejv
Posts: 27
Joined: Wed Feb 15, 2006 9:02 pm
Primary DAW OS: MacOS

Stem mixes from Multiple Interfaces

Post by ejv »

I am trying to send stems to a Dangerous Music 2Bus+ summing mixer using an aggregate Interface setup. I am using a Universal Audio Apollo x8p and a MOTU 828x with the x8p as the main and the 828x as the secondary. I also have drift correction checked on the 828x. No problem sending stems from the 828x but cannot figure out how to send stems from the x8p or if it's even possible. I do see a main monitor mix on the Apollo console going to the 2Bus+ on Inputs 9/10 but that's it. What am I missing here? I have a MacBook Pro using DP11. Thanks, Ed
User avatar
mikehalloran
Posts: 16174
Joined: Sun Jan 25, 2009 5:08 pm
Primary DAW OS: MacOS
Location: Sillie Con Valley

Re: Stem mixes from Multiple Interfaces

Post by mikehalloran »

ejv wrote: Sat Mar 01, 2025 12:19 pm I am trying to send stems to a Dangerous Music 2Bus+ summing mixer using an aggregate Interface setup. I am using a Universal Audio Apollo x8p and a MOTU 828x with the x8p as the main and the 828x as the secondary. I also have drift correction checked on the 828x. No problem sending stems from the 828x but cannot figure out how to send stems from the x8p or if it's even possible. I do see a main monitor mix on the Apollo console going to the 2Bus+ on Inputs 9/10 but that's it. What am I missing here? I have a MacBook Pro using DP11. Thanks, Ed
It’s all in the setup of your Aggregate Device. A screen shot should help.
DP 11.34; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
ejv
Posts: 27
Joined: Wed Feb 15, 2006 9:02 pm
Primary DAW OS: MacOS

Re: Stem mixes from Multiple Interfaces

Post by ejv »

are you asking for a screenshot?
Post Reply