Just purchased this unit. I am able to use for audio and line input sound etc --however the MOTU Discovery software it came with says "There are no devices currently connected.".
I want to check what firmware update it came with out of the box and updated if needed. I have it connected to a USB 3.0 port on my desktop currently running Windows 10. Thanks for any assistance.
MOTU M2 Firmware
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
movingzachb
- Posts: 5
- Joined: Wed Mar 11, 2020 5:06 pm
- Primary DAW OS: Windows
Re: MOTU M2 Firmware
Just bumping this - I have had no replies. I want to know how I can update the firmware when my Motu is not being recognized by the firmware updater.
-
HCMarkus
- Posts: 10380
- Joined: Tue Jan 10, 2006 9:01 am
- Primary DAW OS: MacOS
- Location: Rancho Bohemia, California
- Contact:
Re: MOTU M2 Firmware
Unless someone chimes in quickly here, I'd reach out to MOTU directly. (in case you weren't aware, this is not a MOTU-run website.)
-
mikehalloran
- Posts: 16183
- Joined: Sun Jan 25, 2009 5:08 pm
- Primary DAW OS: MacOS
- Location: Sillie Con Valley
Re: MOTU M2 Firmware
MOTU hardware firmware versions and updaters are normally posted on this page. Searching the MOTU web site does not bring it up but a Google search does.
https://motu.com/techsupport/technotes/firmware
That the M2/M4 are not listed indicates that there have not been any updates released—but that is not certain.
Otherwise,
https://motu.com/techsupport/technotes/firmware
That the M2/M4 are not listed indicates that there have not been any updates released—but that is not certain.
Otherwise,
Please let us know what you find out.I'd reach out to MOTU directly. (in case you weren't aware, this is not a MOTU-run website.)
DP 11.34; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
-
movingzachb
- Posts: 5
- Joined: Wed Mar 11, 2020 5:06 pm
- Primary DAW OS: Windows
Re: MOTU M2 Firmware
Thank you for the reply So far it has been flawless though.
mikehalloran wrote:MOTU hardware firmware versions and updaters are normally posted on this page. Searching the MOTU web site does not bring it up but a Google search does.
https://motu.com/techsupport/technotes/firmware
That the M2/M4 are not listed indicates that there have not been any updates released—but that is not certain.
Otherwise,Please let us know what you find out.I'd reach out to MOTU directly. (in case you weren't aware, this is not a MOTU-run website.)