DP > nanoKontrol a no go …

[Schweats]

I currently have an Akai MPK 61 connected via USB, it also works via the MIDI jacks i/o as well. I've been trying to connect a Korg nanoKontrol controller ( it will only connect via USB) both the AKAI and the nanoKontrol are connected to a powered hub then to the computer. I have downloaded and installed the current Korg MIDI driver. I can not get the nanoKontrol to show up in my audio MIDI setup allowing me to attach a fader or button as a MIDI CC for any track in DP 7.24 or as an input to any of my VI(s) … I've changed usb cables. Anything come to mind… Many thanks in advance - Jim

( I'm expecting my DP 9.5 update any day BTW)

[reedster]

for testing try bypassing the hub

your Audio MIDI Setup / NanoKontrol will likely look something like this when it's working:

[Schweats]

Thanks mate, that was the problem. … and BTW, I use a Kensington Turbo mouse Pro and I had it connected to the hub also and every time I started it would never see the mouse until I unplugged it from the hub , then plugged it back in. Now I have the trackball plugged into the USB port on the Mac keyboard which in turn is plugged into the hub and it 'sees' the trackball every time… go figure

[Gravity Jim]

Are you using a powered hub? If not, I'd get one. Eliminates a lot of common problems.