Got an odd situation here. 2408mk3 connected to a Tascam DM-24 via TDIF, with the Tascam providing word clock to the 2408mk3. When I power up the studio, once everything is up and running, I get 2-3 random output lights on the 2408mk3. There's no audio present on these outputs, not even random noise, and there are no other symptoms. The analog outputs also show a signal if they are set to mirror that particular bank. Again, there is no actual sound coming from these lit outputs.
It used to only happen part of the time, but ever since I built a new computer, it happens all the time.
Not really a huge problem, since there's no sound associated with it, and the channels doing it work fine otherwise. Just a minor irritation.
Anyone else ever seen this?
2408mk3: Phantom output lights.
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows