I have a 2408mk3 connected to my Tascam DM-24 via two TDIF cables on Banks A and B. Bank C has nothing connected to it.
The problem is that I'm looking at the front panel of the unit and the output LED for Channel 8 on Bank C is lit.
In the PCI Audio Console, I have all three banks set for TDIF, and the Analog Outs are set to mirror Bank A. If I change that to mirror Bank C, then the meter for Analog Out 8 shows into the red.
Changing Bank C to any other setting (i.e. analog, ADAT, SPDIF) doesn't have any effect. Connecting Analog Out 8 to an amplifier, I hear nothing, even though the meter is pegged.
Any thoughts?
2408mk3 with stray signals??
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Re: 2408mk3 with stray signals??
Looks like clicking Refresh in the audio console program took care of it.
Re: 2408mk3 with stray signals??
O.K. Spoke too soon.
Now Bank A is showing output on 7 and 8, but there's no audio present. Hitting Refresh in the Audio Console program isn't helping.
Now Bank A is showing output on 7 and 8, but there's no audio present. Hitting Refresh in the Audio Console program isn't helping.