Weird problem.
This 2408mk3 unit was last used a couple of weeks ago, it worked fine.
Today i connect this unit to my studio PC (Windows 7), there's no signal on the analog output.
The meters are green, indicates that there are signal going on all 8 outputs but nothing comes out to the speakers.
Then I test the inputs using mic & preamp, same thing, nothing going into the analog inputs.
This problem persists in standalone mode as well.
ideas? Any help appreciated....
Thanks~
[HELP] Motu 2408 no signal on analog in/out
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
- Posts: 3
- Joined: Thu Jul 26, 2012 3:27 am
- Primary DAW OS: Unspecified
-
- Posts: 3
- Joined: Thu Jul 26, 2012 3:27 am
- Primary DAW OS: Unspecified
Re: [HELP] Motu 2408 no signal on analog in/out
my problem is exactly the same as this one : http://www.gearslutz.com/board/music-co ... utput.html