I have a 1296 and a 2408MkIII attached to a PCI-424 running under Win7 64 bit.
On cold boot the 1296 has no lights in the left hand (sync?) panel and is not present in the Motu audio console. If I power cycle the 1296 it appears in the console and the sync lights come on.
On warm boot (reset) it mostly is recognised, but not always.
Anyone have a solution for this?
1296 not recognised on startup (Solved).
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
1296 not recognised on startup (Solved).
Studio: i7 4770K, 32Gb DDR3, W8.1 x64, PCIe424, 2408Mk3.
Stage: Lenovo W530 i7 3720QM, 16Gb DDR3, W7 x64.VS700R.
Stage: Lenovo W530 i7 3720QM, 16Gb DDR3, W7 x64.VS700R.
Re: 1296 not recognised on startup (Solved).
Doh! Operator error. Need to boot the computer before powering on the interface!!
Studio: i7 4770K, 32Gb DDR3, W8.1 x64, PCIe424, 2408Mk3.
Stage: Lenovo W530 i7 3720QM, 16Gb DDR3, W7 x64.VS700R.
Stage: Lenovo W530 i7 3720QM, 16Gb DDR3, W7 x64.VS700R.