I am trying to record from ADATs through Optical to Cakewalk Pro Audio 9.
In the 324 console I have the first 2 banks set to adat with the outputs from computer. I have the 3rd bank set to audio with output from computer and monitor set as audio 1-2. In Cake walk I have my channel outputs set to audio 1-2 but I'm not getting any output from audio one two. Nothing in phones. I've got good input from the ADATs but no out. Any help?
324 - 2408 Mark II and Cakewalk 9 - No monitor
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
proaudiomaster
- Posts: 3
- Joined: Sun Oct 17, 2010 9:26 pm
- Primary DAW OS: Unspecified
-
proaudiomaster
- Posts: 3
- Joined: Sun Oct 17, 2010 9:26 pm
- Primary DAW OS: Unspecified
Re: 324 - 2408 Mark II and Cakewalk 9 - No monitor
I might add that I get play back through the 2408 but nothing while I'm recording. And yes Cakewalk is set up for sound on sound. Works fine with other cards.
-
proaudiomaster
- Posts: 3
- Joined: Sun Oct 17, 2010 9:26 pm
- Primary DAW OS: Unspecified
Re: 324 - 2408 Mark II and Cakewalk 9 - No monitor
Since I've gotten no responses I am going to assume that because I am recording from light pipe that it is strictly a digital transfer and there is no D/A conversion so I won't be able to monitor it through the 2408. If I am wrong, please correct me.