low input signal ultralite

frolix · Post by **frolix** » Thu Mar 04, 2010 3:20 pm

Hi all,

I'm trying to hook up my AKG perception 220 to one of the 2 XLR inputs but I'm getting a really weak signal in Live (8.1.1). Even with the trim on max I get almost nothing. 48V is on. I'm kinda new to this and am probably missing something but I need it to work soon and can't find any solution ... Anybody got some suggestions?

Respectfully,

Frolix

akumpis · Post by **akumpis** » Thu Mar 04, 2010 4:38 pm

I'm not too familiar with this interface, but chances are that you need to make sure you are using Mic and not Line level. There should be a switch or option that allows you to select between Mic and Line level. Hope this helps.

stephentayler · Post by **stephentayler** » Thu Mar 04, 2010 11:58 pm

Have you checked to see if the Pad is in circuit? I am not sure how it is switched on the Ultralite.... but the indicator light should show if it is on or off, make sure it is off.

Cheers

Stephen

frolix · Post by **frolix** » Fri Mar 05, 2010 12:12 am

tx for the response!

Pad is off i'm sure ... can't find any button or switch to change to 'mic-level' ... Mics are working fine on my mbox, so it's not them ... frustrating problem

...

frolix · Post by **frolix** » Fri Mar 05, 2010 1:04 am

solved ...

restored to factory settings ... don't know what went wrong but now it works!

r

frolix

MOTUnation.com

low input signal ultralite

low input signal ultralite

Re: low input signal ultralite

Re: low input signal ultralite

Re: low input signal ultralite

Re: low input signal ultralite