I have a Mac and a PC. I have the 828MK3 running on the mac. I run the audio out from my PC into the main 1 and 2 inputs on the Motu. I want to be able to hear the PC audio all the time running out to the main outs on the motu just like the audio on the Mac.
How do I do this? Right now I can only hear the PC audio when I arm a recording track in Logic for example.
How do I hear inputs all the time on the 828Mk3?
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
-
cyanbaby101
- Posts: 5
- Joined: Mon Jul 11, 2005 10:01 pm
- Primary DAW OS: Unspecified
Re: How do I hear inputs all the time on the 828Mk3?
Open CuemixFX set it up there.
Save it as a hardware preset to be sure to have it all the time.
Save it as a hardware preset to be sure to have it all the time.
-
cyanbaby101
- Posts: 5
- Joined: Mon Jul 11, 2005 10:01 pm
- Primary DAW OS: Unspecified
Re: How do I hear inputs all the time on the 828Mk3?
How do I set that up in cue?
Re: How do I hear inputs all the time on the 828Mk3?
or just do the settings directly on the 828.
pull up the gain 1 und 2 with the value knob, and adjust the main volume to your needs, then go to setup and save it as preset 1 or sth.
pull up the gain 1 und 2 with the value knob, and adjust the main volume to your needs, then go to setup and save it as preset 1 or sth.