Hello with all
Just a small message to say that after a formatting of my computer, my Ultrlite Mk3 is not connected any more.
However, the programs of installations are ok. But Windows, at the time of Firewire connection says to me: “The peripheral cannot be connected”
Is this a problem of FW. ?
What do you think about it. ?
Thank you very much for your answers
Chris… from Paris
PB ultralite and FW
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
HotShot
- Posts: 63
- Joined: Fri May 15, 2009 7:43 pm
- Primary DAW OS: Windows
- Location: Milwaukee, WI USA
Re: PB ultralite and FW
In Device Manager under IEEE 1394 Bus Host Controllers, make sure you have the driver named "1394 OCHI Compliant Host Controller (Legacy)" showing as being installed.
If you do have this one installed, I can't think of what may be your problem, as the Ultralaite used to work for you on the same system configuration.
If you do have this one installed, I can't think of what may be your problem, as the Ultralaite used to work for you on the same system configuration.
May a song always touch you in a possitive way!
SONAR X1a Producer
Windows 7 Pro 64-Bit
Intel Core i7 920, Gigabyte EX58-UD5, ATI Radeon HD 5770
MOTU UltraLite MK3, Delta 1010LT, KeyStation Pro 88, Shure KSM27, 6GB 1600MHz DDR3, 160GB, 350 GB 7200rpm HDDs, QSC K12s, Numark DDS80
SONAR X1a Producer
Windows 7 Pro 64-Bit
Intel Core i7 920, Gigabyte EX58-UD5, ATI Radeon HD 5770
MOTU UltraLite MK3, Delta 1010LT, KeyStation Pro 88, Shure KSM27, 6GB 1600MHz DDR3, 160GB, 350 GB 7200rpm HDDs, QSC K12s, Numark DDS80
Re: PB ultralite and FW
Tanks for reply..! 
sorry for latest answer.
sorry for latest answer.