828mkII not seen on new MacPro

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Post Reply
vellocet
Posts: 5
Joined: Mon Apr 20, 2009 5:44 pm
Primary DAW OS: Unspecified

828mkII not seen on new MacPro

Post by vellocet »

I've been in contact with MOTU tech support and they've been helpful but have not solved the issue. The 828 is not seen on the new computer. I also have an 8pre which I can connect with the same cable to the same FW port on the computer and it works just fine. The 828 works fine with the same cable hooked up to my wife's iMac. The 828 is fine, the cable is fine, the port is fine. So what can I do with preferences/drives/software that might fix this? Any ideas?
Top
vellocet
Posts: 5
Joined: Mon Apr 20, 2009 5:44 pm
Primary DAW OS: Unspecified

Re: 828mkII not seen on new MacPro

Post by vellocet »

Completely reinstalled drivers. Noticed after trashing trashing everything before reinstalling the 8pre shows up in system profiler while the 828 still does not. Reinstalling drivers did not help. Any thoughts on FW chipset incompatibilities?
Top
vellocet
Posts: 5
Joined: Mon Apr 20, 2009 5:44 pm
Primary DAW OS: Unspecified

Re: 828mkII not seen on new MacPro

Post by vellocet »

Thanks for all the helpful replies. A Sonnet PCI-e FW card (TI chipset?) fixed the problem.
Top
Post Reply

Return to “MOTU Hardware & MacOS”