Ultralite mk3: Driver 1/2 = Display/Playback on 3/4, etc...

[Nathan Shane]

Okay, I bought a new Ultralite mk3 to use on my Vista 64-bit laptop. I downloaded the recently posted updated drivers and everything installed and works...of course, I had to turn OFF UAC to perform the install because there was an Error 1721: Problem with the Windows Installer Package. But that's not the issue, the issue is that the audio drivers and the hardware meters are all offset. In other words, under SONAR, Sound Forge, or any audio app:

Selecting:
Audio Driver Main Out 1/2 = playback metering/audio displayed/heard on Analog 1/2 on the Ultralite
Audio Driver Analog 1/2 = playback metering/audio displayed/heard on Analog 3/4 on the Ultralite
Audio Driver Analog 3/4 = playback metering/audio displayed/heard on Analog 5/6 on the Ultralite
Audio Driver Analog 5/6 = playback metering/audio displayed/heard on Analog 7/8 on the Ultralite
Audio Driver Analog 7/8 = playback metering/audio NOT DISPLAYED OR HEARD AT ALL on the Ultralite
Audio Driver S/PDIF = playback metering/audio displayed/heard on Main L/R on the Ultralite

In other words, all the audio routing and display is offset and occurring on the next one over. Does anyone have any idea why this may be and if there is a correction for it?

[Nathan Shane]

UPDATE: I've been in contact with MOTU about the newest ASIO drivers shifting the outputs one-over, 1/2 outputs to 3/4, 3/4 outputs to 5/6, etc... I spoke with them this past Monday, March 16th 2009 and they were able to repro and confirm the issue and are working on getting the problem fixed. They told me to keep checking their website for news and newly posted drivers but there was no timeline as to when.