amp, firewire, mixer configuration
Moderator: James Steele
Forum rules
Here's where to talk about preamps, cables, microphones, monitors, etc.
Here's where to talk about preamps, cables, microphones, monitors, etc.
-
beaudette
- Posts: 15
- Joined: Wed Nov 03, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: ontario
- Contact:
amp, firewire, mixer configuration
It's been quite some time since I've put my studio together (I moved) and I'm having trouble remembering the configuration between my amp - driving passive monitors - and 828. Do I have to run it through a mixer or can I route it directly into the 828? I've been trying the direct route and not getting any sound. I'm either routing it incorrectly, or perhaps my amp needs a new fuse or something? (yorkville sr300). Please advise....
-
Pappy725
- Posts: 825
- Joined: Sat Oct 16, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Hill Country of Texas
Re: amp, firewire, mixer configuration
Main outs>amp>speakers. Make sure main out volume is up and amp is on. 
Should work like that.
Pappy
Should work like that.
Pappy
MacBook Pro (Retina, 15-inch, Early 2013)
2.4 GHz Intel Core i7, 8GB RAM, OS High Sierra 10.13.2, DP8.07, 256GB SSD
828mkII, 8Pre, Alesis M1 Active Mk2, Ext. FW drives, Yamaha fretless bass, Kay upright bass, Wechter acoustic/electric, trombone, baritone and a proclivity for polka music. (With sufficient quantities of beer) and I play country music.
2.4 GHz Intel Core i7, 8GB RAM, OS High Sierra 10.13.2, DP8.07, 256GB SSD
828mkII, 8Pre, Alesis M1 Active Mk2, Ext. FW drives, Yamaha fretless bass, Kay upright bass, Wechter acoustic/electric, trombone, baritone and a proclivity for polka music. (With sufficient quantities of beer) and I play country music.