2408mkii question- interface control?
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
gunboatstudo
- Posts: 3
- Joined: Mon Feb 16, 2009 5:30 pm
- Primary DAW OS: Unspecified
2408mkii question- interface control?
This setup used to work for me- ADAT out of my Fostex D2424LV to PCI324 card. PCI324 card was connected to 2408mkii via firewire. I don't really remember what the settings on my driver interface were, because I still had control over the interface on the 2408mkii like it was in stand-alone mode. The PCI card starting crashing my system, so I took it out. Now I need to get these tracks out of the D2424LV and onto the PC. So I put a fresh OS (XP) on my PC and I install the PCI324 card per the latest driver instructions. Now I've lost all control at the 2408mkii interface. I change the settings from the driver interface, but I can't get it to recognize the ADAT channels going in to it. Thoughts?
-
gunboatstudo
- Posts: 3
- Joined: Mon Feb 16, 2009 5:30 pm
- Primary DAW OS: Unspecified
Re: 2408mkii question- interface control?
Typo up there. The setup was my D2424LV ADAT outs to the 2408mkii, and in to my PCI324 (of course...)