Possibly broken?
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
VigilantSound
- Posts: 33
- Joined: Thu Oct 23, 2008 7:26 pm
- Primary DAW OS: Unspecified
Possibly broken?
I have a motu 828 mk3, I recently bought a master clock and while hooking up the bnc cable to the motu port i found that i could not tighten the connector the whole way in. When i took a closer look i noticed that the problem was because the hole in the plate was not exactly centered around the connector. So i gently pushed down on the cable while i turned it and it went in, But now the 2 bnc connectors and the s/pdif connectors wobble around. I was wondering if anybody else had what appear to be loose connectors on the units or if its just mine. And if it is just mine should i send it in to be fixed or just not worry about it. I want to open it up a take a look but im not sure how to open it, if some one could give me instructions on how to open up the unit i would really appreciate it. Also i notice on the one spidf connector there is no more resistance keeping it in. it just kinda sits there, it still works.
-
VigilantSound
- Posts: 33
- Joined: Thu Oct 23, 2008 7:26 pm
- Primary DAW OS: Unspecified
Re: Possibly broken?
Nobody? Wobbly connections on the back, like a broken bracket?