CueMix FX - new version???

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
icd
Posts: 9
Joined: Thu Aug 28, 2008 12:41 pm
Primary DAW OS: Unspecified

CueMix FX - new version???

Post by icd »

Is there any new version of CueMIX FX soft?
Where is this spectrum analyzer as showed on MOTU website with info about audio interfaces?
I can't find it. Is this a future update announcement?
Top
majdid
Posts: 117
Joined: Sat Jul 05, 2008 9:47 am
Primary DAW OS: MacOS
Location: Dubai, UAE

Re: CueMix FX - new version???

Post by majdid »

where did you see that? can you post the URL?
Top
icd
Posts: 9
Joined: Thu Aug 28, 2008 12:41 pm
Primary DAW OS: Unspecified

Re: CueMix FX - new version???

Post by icd »

http://www.motu.com/products/motuaudio/828mk3

and then go to Features > CueMix FX software (downsite)
Advanced real-time signal analysis
Top
majdid
Posts: 117
Joined: Sat Jul 05, 2008 9:47 am
Primary DAW OS: MacOS
Location: Dubai, UAE

Re: CueMix FX - new version???

Post by majdid »

yep, thats right, it seems to me that the spectrometer is a whole new 4th tab (In/Mixes/Out) that provides that... but i checked my cuemix and nothing is there... i am using latest drivers.
Top
1nput0utput
Posts: 1477
Joined: Thu Aug 02, 2007 4:21 am
Primary DAW OS: MacOS
Location: USA

Re: CueMix FX - new version???

Post by 1nput0utput »

The new features are probably tied into this release:

http://www.motu.com/products/motuaudio/traveler-mk3
The leading cause of wrong answers is asking the wrong questions.
Top
Gianluca13_2
Posts: 30
Joined: Mon Jun 30, 2008 12:37 am
Primary DAW OS: MacOS
Location: Italy

Re: CueMix FX - new version???

Post by Gianluca13_2 »

Strange behaviour. The links you mentioned lead to the main page of everyone of this products but it is not possible to reach the QueMix Fx Software page. Every time I try I receive an error popup menu. Some one experienced the same problem?
Top
reeper
Posts: 126
Joined: Fri Sep 12, 2008 4:15 am
Primary DAW OS: Unspecified

Re: CueMix FX - new version???

Post by reeper »

hmmm yes 1380
Last edited by reeper on Fri Dec 19, 2008 11:44 am, edited 1 time in total.
nerd info:Cubase 4.5.2. Xp x64. Asus p5q-e. 8gb ram
Top
majdid
Posts: 117
Joined: Sat Jul 05, 2008 9:47 am
Primary DAW OS: MacOS
Location: Dubai, UAE

Re: CueMix FX - new version???

Post by majdid »

well, i have an 828 MK3 and it is not showing. is it a new tab next to in/mix/output tabs?

i am using latest drivers from motu site btw
Top
icd
Posts: 9
Joined: Thu Aug 28, 2008 12:41 pm
Primary DAW OS: Unspecified

Re: CueMix FX - new version???

Post by icd »

I have 828 mk3, too. I can't find it on CueMix FX soft.
Which version of MOTU drivers I should to use?
Top
1nput0utput
Posts: 1477
Joined: Thu Aug 02, 2007 4:21 am
Primary DAW OS: MacOS
Location: USA

Re: CueMix FX - new version???

Post by 1nput0utput »

1nput0utput wrote:The new features are probably tied into this release:

http://www.motu.com/products/motuaudio/traveler-mk3
Like I said before, I don't think a CueMix FX version that has these features has been released yet, and it probably won't be until the Traveler mk3 starts shipping. Then I think we can expect to see these spectrum analysis features in CueMix FX when you're using an 828mk3, 896mk3, UltraLite mk3, or Traveler mk3.
The leading cause of wrong answers is asking the wrong questions.
Top
icd
Posts: 9
Joined: Thu Aug 28, 2008 12:41 pm
Primary DAW OS: Unspecified

Re: CueMix FX - new version???

Post by icd »

Wow!!! I found it.
You have to install Audio Drivers for V4HD.
Version 3.6.8.1380
There is also new version of CueMix FX with this Spectrum Analyzer.
You can find it in EQ section (on graphic screen, in left low corner - there is small arrow)
It works on my 828 mk3.

Enjoy!
Top
reeper
Posts: 126
Joined: Fri Sep 12, 2008 4:15 am
Primary DAW OS: Unspecified

Re: CueMix FX - new version???

Post by reeper »

http://www.motunation.com/forum/viewtop ... 14&t=32798

i had this (1380) in my driverpack for about a month... lol but ok.
nerd info:Cubase 4.5.2. Xp x64. Asus p5q-e. 8gb ram
Top
majdid
Posts: 117
Joined: Sat Jul 05, 2008 9:47 am
Primary DAW OS: MacOS
Location: Dubai, UAE

Re: CueMix FX - new version???

Post by majdid »

icd wrote:Wow!!! I found it.
You have to install Audio Drivers for V4HD.
Version 3.6.8.1380
There is also new version of CueMix FX with this Spectrum Analyzer.
You can find it in EQ section (on graphic screen, in left low corner - there is small arrow)
It works on my 828 mk3.

Enjoy!
you mean this http://s3.amazonaws.com/motu/downloads/ ... U_V4HD.zip ?
a V4HD driver will work on MK3 devices?
Top
icd
Posts: 9
Joined: Thu Aug 28, 2008 12:41 pm
Primary DAW OS: Unspecified

Re: CueMix FX - new version???

Post by icd »

majdid wrote:
icd wrote:Wow!!! I found it.
You have to install Audio Drivers for V4HD.
Version 3.6.8.1380
There is also new version of CueMix FX with this Spectrum Analyzer.
You can find it in EQ section (on graphic screen, in left low corner - there is small arrow)
It works on my 828 mk3.

Enjoy!
you mean this http://s3.amazonaws.com/motu/downloads/ ... U_V4HD.zip ?
a V4HD driver will work on MK3 devices?

I have downloaded it from http://www.v4hd.com/downloads/win_dl.html
It works perfectly on my 828 mk3!
Top
audiopro1969
Posts: 3
Joined: Thu Jan 15, 2009 10:55 am
Primary DAW OS: Unspecified

Re: CueMix FX - new version???

Post by audiopro1969 »

Today MOTU released the new 1394 drivers which I am hoping include the new CueMix FX / FFT Analyzer .

They are availabel at the MOTU downloads page for USB2 and FW interfaces.

I am a new owner of a 828Mk3 and was really pissed last night when I spent an hour trying to find the analyzer function.
I should have started with this forum.

Kyle
Top
Post Reply

Return to “MOTU Hardware & Windows”