Surround monitoring

Here's where to talk about preamps, cables, microphones, monitors, etc.

Moderator: James Steele

Forum rules
Here's where to talk about preamps, cables, microphones, monitors, etc.
Post Reply
Macinbowl
Posts: 110
Joined: Wed Oct 12, 2005 6:43 pm
Primary DAW OS: MacOS
Location: Montreal, Qc

Surround monitoring

Post by Macinbowl »

So now is the time. I really need to upgrade to a surround setup. I already have a pair of dynaudio BM5A and a cheap Polk Audio subwoofer.

So here's my questionning:

- Do I upgrade my existing setup by buying 3 more BM5A and the matching sub BM9S?
- Do I really need a surround controller like the Dangerous Music Monitor ST/SR?
- Is my BM5A are good enough for pro work (I think yes) or do I need to upgrade (with the xtra money involved) to something better?
- What would be better?

What are you guys using for surround work? Monitors, controller...

Mat
Imac Intel core 2 duo 2.33Ghz-2G ram / Macbook Pro 17" core 2 duo 2.33Ghz-2G ram/DP5.12/Logic 8.0.1/M5/MSI/BFD/828/RME Fireface 800/EMU 0404/Dynaudio BM5A
User avatar
HCMarkus
Posts: 10394
Joined: Tue Jan 10, 2006 9:01 am
Primary DAW OS: MacOS
Location: Rancho Bohemia, California
Contact:

Post by HCMarkus »

I'm soon to be setting up my new room, so I also have an interest in other's setups. I figure most of my work will still be stereo, but need to have surround available for scoring work.

My current plan is to install a consumer surround system, using a surround receiver to handle bass management. I know I want a consumer system in the room, regardless, for confidence monitoring (post Dolby, using the receiver's decoder), but am not sure if I will be ready to make the investment in active surrounds and bass management.

Which reminds me... I have never explored the DP manual on this point. Does the Surround plug in do bass management? I recall it handles levels and delays...

Anybody willing to weigh in here?
HC Markus
M1 Mac Studio Ultra • 64GB RAM • 828es • macOS 15.4.1 • DP 11.34
https://rbohemia.com
User avatar
Aramis
Posts: 1168
Joined: Thu Nov 11, 2004 10:01 pm
Primary DAW OS: MacOS
Location: Lac Beauport

Re: Surround monitoring

Post by Aramis »

Hello !
I do use 5 BX5a from Maudio , a sub and LogisStudio .
That is all ! No controler .

Aramis



Macinbowl wrote:So now is the time. I really need to upgrade to a surround setup. I already have a pair of dynaudio BM5A and a cheap Polk Audio subwoofer.

So here's my questionning:

- Do I upgrade my existing setup by buying 3 more BM5A and the matching sub BM9S?
- Do I really need a surround controller like the Dangerous Music Monitor ST/SR?
- Is my BM5A are good enough for pro work (I think yes) or do I need to upgrade (with the xtra money involved) to something better?
- What would be better?

What are you guys using for surround work? Monitors, controller...

Mat
iMac 2012 27 ' 3.2 ghz 32 gigs ram OSX 10.9.4 DigitalPerformer 8.7 , MOTU Track 16, MOTU MachFive3.2, Ethno and BPM , Komplete 9, OmniSphere , Trilian and Stylus RMX , Axon mkII and Godin LG .
User avatar
Aramis
Posts: 1168
Joined: Thu Nov 11, 2004 10:01 pm
Primary DAW OS: MacOS
Location: Lac Beauport

Post by Aramis »

Remember that DP does not encode the surround channels .

Aramis
HCMarkus wrote:I'm soon to be setting up my new room, so I also have an interest in other's setups. I figure most of my work will still be stereo, but need to have surround available for scoring work.

My current plan is to install a consumer surround system, using a surround receiver to handle bass management. I know I want a consumer system in the room, regardless, for confidence monitoring (post Dolby, using the receiver's decoder), but am not sure if I will be ready to make the investment in active surrounds and bass management.

Which reminds me... I have never explored the DP manual on this point. Does the Surround plug in do bass management? I recall it handles levels and delays...

Anybody willing to weigh in here?
iMac 2012 27 ' 3.2 ghz 32 gigs ram OSX 10.9.4 DigitalPerformer 8.7 , MOTU Track 16, MOTU MachFive3.2, Ethno and BPM , Komplete 9, OmniSphere , Trilian and Stylus RMX , Axon mkII and Godin LG .
User avatar
HCMarkus
Posts: 10394
Joined: Tue Jan 10, 2006 9:01 am
Primary DAW OS: MacOS
Location: Rancho Bohemia, California
Contact:

Post by HCMarkus »

I understand DP does not Dolby-encode. Just wondering if it does Bass Management. I'm gonna' go read the manual now...
User avatar
HCMarkus
Posts: 10394
Joined: Tue Jan 10, 2006 9:01 am
Primary DAW OS: MacOS
Location: Rancho Bohemia, California
Contact:

Post by HCMarkus »

Bass Management Plug in, Page 773
Calibration Plug in, Page 774 :D
User avatar
Aramis
Posts: 1168
Joined: Thu Nov 11, 2004 10:01 pm
Primary DAW OS: MacOS
Location: Lac Beauport

Post by Aramis »

Dolby or DTS


HCMarkus wrote:I understand DP does not Dolby-encode. Just wondering if it does Bass Management. I'm gonna' go read the manual now...
iMac 2012 27 ' 3.2 ghz 32 gigs ram OSX 10.9.4 DigitalPerformer 8.7 , MOTU Track 16, MOTU MachFive3.2, Ethno and BPM , Komplete 9, OmniSphere , Trilian and Stylus RMX , Axon mkII and Godin LG .
Post Reply