Creating subgroups on 896mk3 / CueMix FX

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
Klaus
Posts: 1192
Joined: Sat Oct 16, 2004 10:01 pm
Primary DAW OS: MacOS
Location: Nordring 38, CH - 3013 Berne

Creating subgroups on 896mk3 / CueMix FX

Post by Klaus »

Just route thru AES and / or SPDif out, then loop back in with a cable, and route out to main, don't use these source channels into main too...
There is some additional delay but not much...

Take care

Klaus

( BTW, the 896mk3 is working nicely with AULab as a live mixer, 128 buffer,
gives about 3 meter in the air, measured with Smaart )
Top
Post Reply

Return to “MOTU Hardware & Windows”