I could really use either: an explanation of the “bounce” function/features on the 2408 MK 1 or a photo copy/pdf/clay tablet of the manual pages explaining it.
My issues using the MK1 along with an 828MK 2 seem to revolve around “bounce”
Thank you
Almost there…
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Let me rephrase
First, thanks for taking the time to respond.
I'm using an 828 MKII along with a 2408 MKI (no pci card, just as an additional I/O).
The 828 uses the 2408 as an ADAT source, and there fore “sees” the audio going to and coming from the 2408 (indicated by the ADAT “in/out’” lights on the 828.
My dilemma comes as the audio that utilizes the 2408 is reverb in/out from external hardware. It seems that I'm only able to get the audio properly routed back into the 828 if I set the “bounce” on the 2408 to a different pair, lest I get feedback/combing.
I don't know if this is complex/obscure or even pointless, but since I don't have the manual and I'm not interested in shelling out $20 to MOTU for another one, I was hoping someone out there would go “ah ha” I know what he means, here's how to fix it”.
So, thanks again
I'm using an 828 MKII along with a 2408 MKI (no pci card, just as an additional I/O).
The 828 uses the 2408 as an ADAT source, and there fore “sees” the audio going to and coming from the 2408 (indicated by the ADAT “in/out’” lights on the 828.
My dilemma comes as the audio that utilizes the 2408 is reverb in/out from external hardware. It seems that I'm only able to get the audio properly routed back into the 828 if I set the “bounce” on the 2408 to a different pair, lest I get feedback/combing.
I don't know if this is complex/obscure or even pointless, but since I don't have the manual and I'm not interested in shelling out $20 to MOTU for another one, I was hoping someone out there would go “ah ha” I know what he means, here's how to fix it”.
So, thanks again