I recently got a replacement PCI 424 card from MOTU and now I'm getting some problems.
If I have trax playing on ch 1&2 I'll get occaisional pops/clicks on ch 3. Ch 5&6 will give me that on Ch 7. Trax playing on Ch 1&2 and 7&8 will give me those on Ch's 3 and 9. Etc....
I've tried reseating my card and I'm going to do an Uninstall/install of the driver tomorrow.
Just wondering if anyone else has had this problem or knows a fix.
HD192- clicks on adjacent channels
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
An update in case anyone has the same problem. Everythings good now.
I did 2 things. One was to blow out the fans in the G4. The other was to move the PCI424 card into an adjacent slot. It was in the 1st slot right next to the video card. There is now a larger gap between the 2 cards.
I suspected an overheating problem since the clicks/pops started happening after the 2nd hour of being turned on.
I did 2 things. One was to blow out the fans in the G4. The other was to move the PCI424 card into an adjacent slot. It was in the 1st slot right next to the video card. There is now a larger gap between the 2 cards.
I suspected an overheating problem since the clicks/pops started happening after the 2nd hour of being turned on.