Can't hear 192khz audio on 896...

mortvillefugitive · Post by **mortvillefugitive** » Wed Dec 12, 2007 2:24 pm

I tried to play back a file recorded at 192khz this morning and I didn't get any audio at all. The meters in logic were bouncing, but I wasn't getting any sound. I initially imported the file into a 44.1 project and of course got the incredibly slowed down version, but once I switched to 192, I got nothing. the file plays in iTunes. Any suggestions?

I personally track at 44.1, so there may have been something that I'm missing, but I have a fairly good idea of what I'm doing, usually.

rainy-taxi · Post by **rainy-taxi** » Wed Dec 12, 2007 11:33 pm

do you use the 896 or 896hd? the first cant handle 192khz audio afaik

mortvillefugitive · Post by **mortvillefugitive** » Thu Dec 13, 2007 7:30 am

896HD. Are there different "sets" of converters for each sample rate? It seems that I've heard that before... maybe my 192khz converters don't work? that's probably horribly inaccurate.

1nput0utput · Post by **1nput0utput** » Thu Dec 13, 2007 8:09 am

Which outputs are you using for monitoring? A 4X sample rates (176.4kHz and 192kHz), the 896HD main outputs mirror the phones output. So you must set the track output to phones 1-2 in order to hear audio through the mains at 192kHz.

mortvillefugitive · Post by **mortvillefugitive** » Thu Dec 13, 2007 8:38 am

Sounds like I might be getting somewhere, that's good to know. So I can't have the output set to the normal stereo out? I'm not at home to test it, but I'll try that as soon as I am. Thanks!

donreynolds · Post by **donreynolds** » Thu Dec 13, 2007 7:20 pm

1nput0utput wrote:Which outputs are you using for monitoring? A 4X sample rates (176.4kHz and 192kHz), the 896HD main outputs mirror the phones output. So you must set the track output to phones 1-2 in order to hear audio through the mains at 192kHz.