I still can't run the 828MII USB under OS 10.5.1 on a G5 Mac!! (it apparently works OK on an Intel Mac with release 1.4.6)
MOTU have released 3 sets of drivers in a week but PPC is still not supported.
Getting a bit fed up now.... It's not like Leopard sprang out of the bushes from nowhere!! Developer copies have been around for months and months....
Paul
Anyone know when PPC Leopard 10.5 drivers are coming????
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
- emulatorloo
- Posts: 3227
- Joined: Mon Jan 03, 2005 10:01 pm
- Primary DAW OS: MacOS
- Location: Iowa
-
- Posts: 69
- Joined: Sun Jun 26, 2005 10:01 pm
- Primary DAW OS: MacOS
- Location: Bilbao, Spain
- Contact:
Sorry, I use the Ultralite (Firewire).autobeat wrote:hi borjam
are you shure you`re using the 828 mkII USB Version on PPC with 10.5?
it‘s definately not working over here, tried everything, even Itunes is not playing song when connected to the 828.....
I didn't understand that you were meaning that it affected *just* the USB model.
Leopard drivers
I have a call logged with MOTU for this.
I've been through a fair bit of testing now, including:
Installing 10.5 onto a separate partition with no other software and then installing the MOTU drivers. Still no good.
I made sure that the 828MkII usb was plugged directly into the Mac (not a hub) etc.. still no good.
Unplugged all other USB stuff. Still no good.
I'm beginning to think it's to do with the flavor of Mac I have:
----------------------------------------------------------
Model Name: Power Mac G5
Model Identifier: PowerMac7,2
Processor Name: PowerPC 970 (2.2)
Processor Speed: 1.8 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.5f2
----------------------------------------------------------
(You can get this from Apple/About this Mac/More Info)
DON'T CUT A PASTE YOUR SERIAL NUMBER AND POST IT HERE...(just a little security warning)
Does everyone who has a problem have this type of Mac???
Might nail it down if we do!!
Paul
I've been through a fair bit of testing now, including:
Installing 10.5 onto a separate partition with no other software and then installing the MOTU drivers. Still no good.
I made sure that the 828MkII usb was plugged directly into the Mac (not a hub) etc.. still no good.
Unplugged all other USB stuff. Still no good.
I'm beginning to think it's to do with the flavor of Mac I have:
----------------------------------------------------------
Model Name: Power Mac G5
Model Identifier: PowerMac7,2
Processor Name: PowerPC 970 (2.2)
Processor Speed: 1.8 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.5f2
----------------------------------------------------------
(You can get this from Apple/About this Mac/More Info)
DON'T CUT A PASTE YOUR SERIAL NUMBER AND POST IT HERE...(just a little security warning)
Does everyone who has a problem have this type of Mac???
Might nail it down if we do!!
Paul