The free VI's/plugs list.

dbender · Post by **dbender** » Wed Oct 31, 2007 5:18 pm

The posts above inspired me to try yet again to install Independence Free. Did everything during install properly, but when I launch the stand alone app, for < 1 sec the main program screen flashes but then I get an error message window. When you click OK, the program closes. The error message window says "no valid samplerates found." I still get this whether or not I have my 828 on or off. I have not tried first setting in the Mac's Sound preference the 828 as the output, but this shouldn't matter as the native Mac's sample rate should work even without an external interface.

Anyone have any ideas? (Yes, the .yif files for the demo are inside the images folder where they should be, inside the main path folder etc.)

Thanks!!

daniel.sneed · Post by **daniel.sneed** » Wed Oct 31, 2007 5:31 pm

Thanks Cuttime for your input.

No doubt, LAConvolver is a much interesting freebie.

cuttime · Post by **cuttime** » Wed Oct 31, 2007 6:08 pm

dbender wrote: Anyone have any ideas? (Yes, the .yif files for the demo are inside the images folder where they should be, inside the main path folder etc.)

Thanks!!

Do you have the YT Key Manager installed in your boot directory?

monkey man · Post by **monkey man** » Thu Nov 01, 2007 7:09 am

timriley wrote:
cuttime wrote:LAConvolver v0.2.2 is out, a very good freebie:
http://www.versiontracker.com/dyn/moreinfo/macosx/32033
This has just filled a huge gap in my arsenal!

Who's "nal"?
Why would you want to fill that gap?
How will you... um... poo?

timriley wrote:Or should I have said, 'huge space' haha

Dunno, gap or hole works for me.

Sorry.

dbender · Post by **dbender** » Thu Nov 01, 2007 12:55 pm

cuttime wrote:
dbender wrote: Anyone have any ideas? (Yes, the .yif files for the demo are inside the images folder where they should be, inside the main path folder etc.)

Thanks!!
Do you have the YT Key Manager installed in your boot directory?

I don't think so. Is that a seperate download? Didn't get installed with the Independence Free installer. How do I get and install the YT Key Manager?

Thanks.

cuttime · Post by **cuttime** » Thu Nov 01, 2007 1:12 pm

dbender wrote: How do I get and install the YT Key Manager?

Thanks.

Nowhere in their documentation do they state that you actually need this:

http://www.yellowtools.us/cp21/cms/inde ... ymanager_e

You don't need to actually run it, just have it on your boot drive. You don't have to install the YTKM preference pane either.

dbender · Post by **dbender** » Thu Nov 01, 2007 2:30 pm

cuttime wrote:
dbender wrote: How do I get and install the YT Key Manager?

Thanks.
Nowhere in their documentation do they state that you actually need this:

http://www.yellowtools.us/cp21/cms/inde ... ymanager_e

You don't need to actually run it, just have it on your boot drive. You don't have to install the YTKM preference pane either.

cuttime --

Thanks, I installed YTKM but still get the same error. The 8 .ytif files for the demo are inside /Independence Basic Path/image files folder. Any other helpful ideas anyone re: why I am getting this error message re: samplerates when I launch Independence Free?? Thanks.

timriley · Post by **timriley** » Wed Nov 07, 2007 2:24 pm

Just found this one! Slim Slow Slider Sidechain Compressor updated to Universal Binary!!

http://www.kvraudio.com/get/1315.html

monkey man wrote:
timriley wrote:
cuttime wrote:LAConvolver v0.2.2 is out, a very good freebie:
http://www.versiontracker.com/dyn/moreinfo/macosx/32033
This has just filled a huge gap in my arsenal!
Who's "nal"?
Why would you want to fill that gap?
How will you... um... poo?

timriley wrote:Or should I have said, 'huge space' haha
Dunno, gap or hole works for me.

Sorry.

Cheeky monkey!!

monkey man · Post by **monkey man** » Thu Nov 08, 2007 6:22 am

timriley wrote:Cheeky monkey!!

Cheeks I can handle.
Please don't call me the... um... gap in the middle though.

timriley · Post by **timriley** » Thu Nov 08, 2007 8:01 am

Oooh.... Don't tempt me!

monkey man · Post by **monkey man** » Fri Nov 09, 2007 5:42 am

OK... I said nothing.

I would love to know why I haven't been able to download Ticky Clav, Cheese Machine, and now I discover also Slim Slow Slider Sidechain Compressor.
I've been attempting these for months as they're UB updates.

blazingrythm · Post by **blazingrythm** » Sun Nov 11, 2007 6:47 am

I have heard of side chain before but never knew what it meant.
What's a 'side chain?' as in side chain compressor?

jmguru · Post by **jmguru** » Sat Nov 17, 2007 10:10 pm

A new build of Automat 1.0b is out.
Samples work! Fx input ! some new presets to boot

http://www.alphakanal.de:4356/

This version is very usable now and puts some of my commercial VI's to shame.

monkey man · Post by **monkey man** » Sun Nov 18, 2007 4:54 am

jmguru wrote:A new build of Automat 1.0b is out.
Samples work! Fx input ! some new presets to boot
http://www.alphakanal.de:4356/
This version is very usable now and puts some of my commercial VI's to shame.

Thank you, jmguru.

NitrouStang96 · Post by **NitrouStang96** » Mon Nov 26, 2007 4:07 pm

1) I see a ton of free plugs, but no VI's...
2) I've been reading about deconvolution. What types of things do you guys use deconvolution for?

MOTUnation.com

The free VI's/plugs list.

Side Chain Compressor

Two Questions: