I'm using DP 5.11 and M5 1.2.3. Mac system is 10.4.10. I haven't used UVI Extract in quite a while and now that I have some new sounds to add to my library, the UVI button in M5 winks but doesn't open the program. I haven't seen anything about this having problems with the system. Does anybody have any ideas or should I be re-installing.
Thanks.
UVI Extractor not opening
Moderator: James Steele
-
midicomplex
- Posts: 3
- Joined: Tue Nov 16, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Nashville
- Contact:
-
enigmatunes
- Posts: 57
- Joined: Tue Jan 24, 2006 11:15 am
- Primary DAW OS: Unspecified
Sorry if this sounds elementary, but this was my fix for the same prob...
Make sure that the UviX application is where it should be:
[Macintosh HD]/Library/Application Support/MOTU/MachFive/UviX OSX
If it is there you can launch it by double-clicking it. If it's not there I suggest downloading and installing the "UVI & Extras" download (which I see on the MachFive for OSX downloads page).
Make sure that the UviX application is where it should be:
[Macintosh HD]/Library/Application Support/MOTU/MachFive/UviX OSX
If it is there you can launch it by double-clicking it. If it's not there I suggest downloading and installing the "UVI & Extras" download (which I see on the MachFive for OSX downloads page).
"Where do these stairs go?" ...
"They go up."
"They go up."
-
midicomplex
- Posts: 3
- Joined: Tue Nov 16, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Nashville
- Contact:
UVI working
Thanks for the advice. I now have the UVI extractor working as a solo program so that I can get the work done. However, for some reason, the Mach 5 program isn't patching to it. I'll address that later but in the meantime, I can get to work. Thanks again.