Search found 3 matches
- Mon Jan 24, 2011 9:39 pm
- Forum: MOTU Hardware & MacOS
- Topic: Repairing ADAT connectors on a MOTU 2408 MKII
- Replies: 6
- Views: 1037
Re: Repairing ADAT connectors on a MOTU 2408 MKII
Just to verify -- I did measure the voltage on my MOTU 2408 where the legs had broken on one of the ADAT connectors and it measured exactly 3 volts--which is why you need to use either the GP1FAV30TK0F or GP1FAV31TK0F (with shutter). The GP1FAV50TK0F & GP1FAV51TK0F are both 5 Volt supply models-...
- Mon Jan 24, 2011 9:36 pm
- Forum: MOTU Hardware & MacOS
- Topic: Repairing ADAT connectors on a MOTU 2408 MKII
- Replies: 6
- Views: 1037
Re: Repairing ADAT connectors on a MOTU 2408 MKII
Okay, hopefully this helps anyone in the future who buys a 2408 used and has trouble with the ADAT connectors. The exact part that MOTU uses is in the DigiKey catalog on the link above (SHARP - GP1FAV30TK0F), BUT DigiKey does not stock them anymore. The only place I could find them is at Farnell in ...
- Mon Jan 24, 2011 7:16 pm
- Forum: MOTU Hardware & MacOS
- Topic: Repairing ADAT connectors on a MOTU 2408 MKII
- Replies: 6
- Views: 1037
Re: Repairing ADAT connectors on a MOTU 2408 MKII
It's definitely NOT the 147 or 177 as posted on this page. I just recently bought a 2408 with a broken connector and ordered both of these from Digikey and the black plastic support legs are in the wrong spot. The 3 metal pins are close but the legs have to be right since MOTU cuts off the top attac...