MOTUnation.com

I have a sample disk for the Ensoniq ASR 10. I need help converting it and wondering if someone has done this or if it is possible.
Thanks

I use Ensoniq ASR10 also, but am just getting into daw. Theres the Ensoniq disk utility, but I think thats for converting pc disks to Ensoniq format. Will check around, let you know if I can come up w/anything.

Theres also Teesoniq, Tee is the only Ensoniq repair facility left in the country. He's very knowledgeable about everything Ensoniq...
You can reach him @ 408-567-9277

Is it a hard disk, or are the samples on a floppy? An Ultra Emulator (hardware sampler) can read Ensoniq samples which can then be saved as E-mu format and loaded into Mach V. This is how I converted my Emax 2 library.

This is something I may look into, I have tons of Ensoniq disks.

Thanks.

thracks wrote:Is it a hard disk, or are the samples on a floppy? An Ultra Emulator (hardware sampler) can read Ensoniq samples which can then be saved as E-mu format and loaded into Mach V. This is how I converted my Emax 2 library.

mine is a factory CD with about 1000 samples/multisamples

majorwest wrote:

thracks wrote:Is it a hard disk, or are the samples on a floppy? An Ultra Emulator (hardware sampler) can read Ensoniq samples which can then be saved as E-mu format and loaded into Mach V. This is how I converted my Emax 2 library.

mine is a factory CD with about 1000 samples/multisamples

I've had success converting from a floppy via an E6400 Ultra, but I've never tried it with a CD. I'd have to go back and look at the EOS updates and see if they support ASR conversion via SCSI.

chicken systems traslator does ensoniq very well