Hey guys,
It's been a long time since I've been on here and I finally have gotten around to doing some recording with a new (to me) full band. However, I'm trying to figure out the Aux sends to give everyone their own mix. So the MOTU 1248 literature says that I can have 7 Aux sends, but I only see 3 when my sample rate is 96 Khz. I should say 3 stereo sends. I have 6 people in the band and would love to give everyone their own stereo mix. Is this possible at 96 Khz? I know I can do mono Aux sends but why not stereo? Anyway, if someone has dealt with this and knows a solution, I'd love to hear it.
Thanks,
Billy
MOTU AVB Aux sends
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
mandobilly64
- Posts: 73
- Joined: Fri Oct 03, 2008 4:23 pm
- Primary DAW OS: Windows
-
HCMarkus
- Posts: 10399
- Joined: Tue Jan 10, 2006 9:01 am
- Primary DAW OS: MacOS
- Location: Rancho Bohemia, California
- Contact:
Re: MOTU AVB Aux sends
You may just not be displaying the additional sends (check boxes for the additional Aux outputs on left side of AVB Mixer), or you may need to set them up in the AVB Mixer Matrix.
If all else fails, try it at 44.1/48k and see if more Auxs show up.
If all else fails, try it at 44.1/48k and see if more Auxs show up.
-
mandobilly64
- Posts: 73
- Joined: Fri Oct 03, 2008 4:23 pm
- Primary DAW OS: Windows
Re: MOTU AVB Aux sends
Yes, I tried this and at 96 Khz, only Aux 1-6 are available, which can still give me 6 mono sends, which is what I guess I'll have to live with. When switching to 48, more Aux sends as well as another group shows up.