Page 1 of 1

NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Mon Oct 02, 2017 2:55 pm
by radium78
Hi.

I need avusb v 1.32 chip to my MIDI timepiece.

If you are mac user and you have 1.32 chip on you device. Can we trade? I give my avusb 1.31 to you and you send avusb 1.32 to me? V 1.31 Works only mac's and 1.32 works in PC (and mac). After this your device works like before.

Or if you have avusb 1.32 chip to sell.

I can pay everything afcourse.

Please, help me

Rauno
Finland

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Mon Oct 02, 2017 3:17 pm
by mikehalloran
V 1.31 Works only mac's
Not likely. That chip was updated to 1.32 before the firmware was updated to 2.0.1 which is required for the MTP AV USB to work with a Mac.

That chip and the v.2.0.1 firmware were sold as an upgrade pair through the middle of May, 2012. I bought one of the last sets that month to update mine. When I went to replace them, mine had the 1.32 chip already so I sold my spare (other MOTU interfaces needed the firmware chip only).

The only way to get one now is to find an MTP AV USB with both. If the firmware chip is 2.0.1, the other chip should be 1.32.

On eBay, I notice that those sellers with the current chips advertise this; the rest pretend the issue doesn't exist. You might get lucky and find a non-working unit with both chips — could happen.

I no longer use mine.

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Mon Oct 02, 2017 3:33 pm
by mikehalloran
Image

Image

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Mon Oct 02, 2017 3:59 pm
by James Steele
mikehalloran wrote:On eBay, I notice that those sellers with the current chips advertise this; the rest pretend the issue doesn't exist.
Yep. Major buyer beware situation. It bugs me when sellers feign ignorance about this stuff.

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Mon Oct 02, 2017 10:10 pm
by radium78
Hi.

Actually firmware is 2.01, but avusb is 1.31.

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Mon Oct 02, 2017 10:54 pm
by mikehalloran
radium78 wrote:Hi.

Actually firmware is 2.01, but avusb is 1.31.
Damn.

The MicroExpress USB and others of that series just need the 2.0.1 to be compatible. It’s only the MTP AV USB that needs both.

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Mon Oct 02, 2017 11:54 pm
by radium78
Yea, one option is. If I got one for copy the flash and then just tranfer code to enpty eprom. I have all what needed to do this operation. After cloning send eprom back. After this I can do chips who needed.

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Sun Jul 22, 2018 6:42 am
by AdFines
I have suggested that we do this, but those who have such an eprom do not want to cooperate in such a way. i think i buy on ebay the device with the proper roms and i make a copy and i go to work

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Sun Jul 22, 2018 9:31 am
by mikehalloran
Postage to Romania or Croatia is just under $100 for a flat rate box. I’d rather sell my unit that has both chips.

No one local to me has ever asked or I would consider loaning mine. That, however, has never happened.

Re: NEED!!! AVUSB 1.32 CHIP to MIDI timepiece

Posted: Sun Jul 22, 2018 9:39 pm
by AdFines
https://rover.ebay.com/rover/0/0/0?mpre ... 2649781040


The link is just an informative ... shiping + rom needed for update and copying.