Page 1 of 1
Checklist for Record enable audio?
Posted: Thu Jan 22, 2009 1:05 pm
by pjmnash
I'm trying to figure out why my track won't let me record enable or record. I keep checking transmit/receive etc and my interface is listed on the track sheet but what's wrong? 
Could someone please list a checklist of Go i.e. Record precedures?
Thanks,
The lady in Texas
Re: Checklist for Record enable audio?
Posted: Thu Jan 22, 2009 2:03 pm
by 1nput0utput
If it's a MIDI track and Multi Record is disabled, the track must have an output assignment.
If it's a MIDI track and Multi Record is enabled, the track must have an input assignment and an output assignment.
If it's an audio track, it must have a valid input assignment and a valid output assignment, and the track must be enabled.
The audio system must be MAS or DAE; audio tracks can not be record-enabled in MIDI only mode.
Re: Checklist for Record enable audio?
Posted: Fri Jan 23, 2009 9:58 am
by Eleventh Hour Sound
pjmnash wrote:I'm trying to figure out why my track won't let me record enable or record. I keep checking transmit/receive etc and my interface is listed on the track sheet but what's wrong?
Could someone please list a checklist of Go i.e. Record precedures?
Thanks,
The lady in Texas
Try opening the MOTU demo sequence and see if you're able to play it back and hear it . If so, your audio outputs should be ok. Then try selecting a valid audio input channel on one of the mono audio tracks and then try to record.
The manual can be helpful too
Re: Checklist for Record enable audio?
Posted: Fri Jan 23, 2009 12:38 pm
by SixStringGeek
The usual culprit is the track has no valid output - if the output is in italics - its not valid. Choose something else.