any one noticed that when switching sample rate to 192, the DSP usage meter on the CueMix software goes suddently to 100%. Also, i noticed that some of the input and output meters are showing a very slight activity even though there is no audio going in or out of the unit.
btw, this is on a 828 MK3
192K on 828 MK3
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
1nput0utput
- Posts: 1477
- Joined: Thu Aug 02, 2007 4:21 am
- Primary DAW OS: MacOS
- Location: USA
Re: 192K on 828 MK3
The 828mk3 can't do any effects processing at 4X sample rates (176.4kHz and 192kHz). That's why the DSP usage meter immediately goes to the maximum level.
The leading cause of wrong answers is asking the wrong questions.