Page 1 of 1
Ultralite mk3 Outs
Posted: Thu Oct 02, 2008 6:33 pm
by kitchsync
Is it possible to route the audio from a computer to more than just the Main Out 1-2 at the same time?
I want to send the same signal to a speaker system and to the front of house.
Can't find anything in the manual.
I'm using Mainstage (Logic Pro) BTW for live performances.
Thanks,
J M
Re: Ultralite mk3 Outs
Posted: Fri Oct 03, 2008 6:28 am
by 1nput0utput
The ULmk3 has a feature where the main outputs can mirror any other output pair. So you can configure the playback software you're using to output to analog 1-2, for instance, and then set Main Out Assign to analog 1-2. Now the same audio signal appears at both output pairs.
Re: Ultralite mk3 Outs
Posted: Sat Oct 04, 2008 5:09 am
by kitchsync
Thanks, that's great. Obviously I'm still getting my head around the Ultralite.
It's a great little box.
J M
Re: Ultralite mk3 Outs
Posted: Sat Oct 18, 2008 7:35 am
by OortNYC
Can the original Ultralite do this? If so where does that get set/
Thanks-
D -
Re: Ultralite mk3 Outs
Posted: Mon Oct 20, 2008 6:36 am
by 1nput0utput
OortNYC wrote:Can the original Ultralite do this? If so where does that get set/
Thanks-
D -
No, unfortunately the original UL doesn't have this feature.
Re: Ultralite mk3 Outs
Posted: Wed Oct 22, 2008 6:25 pm
by therealbigd
any motu hardware with more than 1 set of analogue outs should be able to perform this. use the "Motu Audio Setup" menu (microphone icon)
Re: Ultralite mk3 Outs
Posted: Tue Apr 13, 2010 11:58 pm
by merges
this was driving me nuts. stupidly complicated and poorly documented. here's a step by step that will help.
http://www.merges.net/miscellaneous/motuUltraLite.html