Page 1 of 1
Does The PCI-324 2408mk11 Work In OS 10.4?
Posted: Thu Apr 26, 2007 8:49 am
by adavis
Hello to all,
I'm thinking of upgrading my ppc g4 from OS10.3.8 to OS10.4 to run Logic Pro 7.2.3. Will my pci-324 2408mk11 run on that OS? I checked motu's website and it spoke of the 424 and 10.4 but not the 324.
Thanks for any help,
adavis
Re: Does The PCI-324 2408mk11 Work In OS 10.4?
Posted: Tue May 01, 2007 6:45 am
by emulatorloo
adavis wrote:Hello to all,
I'm thinking of upgrading my ppc g4 from OS10.3.8 to OS10.4 to run Logic Pro 7.2.3. Will my pci-324 2408mk11 run on that OS? I checked motu's website and it spoke of the 424 and 10.4 but not the 324.
Thanks for any help,
adavis
I have run a PCI-324 + 2408mkII in PPC g4 with 10.4
no problems.
---
Re: Does The PCI-324 2408mk11 Work In OS 10.4?
Posted: Tue May 01, 2007 9:50 am
by adavis
emulatorloo wrote:adavis wrote:Hello to all,
I'm thinking of upgrading my ppc g4 from OS10.3.8 to OS10.4 to run Logic Pro 7.2.3. Will my pci-324 2408mk11 run on that OS? I checked motu's website and it spoke of the 424 and 10.4 but not the 324.
Thanks for any help,
adavis
I have run a PCI-324 + 2408mkII in PPC g4 with 10.4
no problems.
---
Thanks for your reply,
Do you use the osx Tiger 424 driver?
adavis
Re: Does The PCI-324 2408mk11 Work In OS 10.4?
Posted: Tue May 01, 2007 10:28 am
by emulatorloo
adavis wrote:Thanks for your reply,
Do you use the osx Tiger 424 driver?
adavis
I am pretty sure I installed the one called:
MOTU PCI-324/424 OSX Install
File Name: pcix_1.0.8.zip
Type: driver
Date: 2005/04/29
Language: english
Version: 1.0.8
Size: 3.07MB
Platform: Mac OSX
ON EDIT -- Just confirming that is indeed the version I installed!
-
Posted: Wed May 02, 2007 10:45 am
by adavis
emulatorloo
Thanks again,
adavis
Posted: Mon Jul 30, 2007 2:20 pm
by supersonic
The Universal MOTU installer didn't work on my G4. I had install the 1.0.8 version of the driver found under the 324 download section in order to get the card to be recognized.
Re: Does The PCI-324 2408mk11 Work In OS 10.4?
Posted: Sun Aug 05, 2007 5:21 pm
by Bertzkii
emulatorloo wrote:
I have run a PCI-324 + 2408mkII in PPC g4 with 10.4
no problems.
---
But CueMix doesn't work with 324 and os x, you'll need the 424. Correct me if I'm wrong. I'm running 2408MkII with 424 on a PPCG4.
Re: Does The PCI-324 2408mk11 Work In OS 10.4?
Posted: Sun Aug 05, 2007 7:57 pm
by emulatorloo
Bertzkii wrote:
But CueMix doesn't work with 324 and os x, you'll need the 424. Correct me if I'm wrong. I'm running 2408MkII with 424 on a PPCG4.
Yes Cuemix DSP needs the 424 card.
--
Posted: Mon Aug 06, 2007 3:29 am
by supersonic
So is the 1.0.8 driver the correct one to use with the 324.
Posted: Tue Sep 11, 2007 9:08 pm
by caffiend
This is getting my goat as well......I just scored a 2408mkII and new dual gig tower running 10.4.1. from ebay.
Downloaded the newest (only) available drivers and am trying to set up routing. The motu is outputting fine, but I was having some problems getting a signal in. I decided to subtract the board from the equation while trouble shooting and am trying to run a Korg ms-2000 direct in.
Pretty sure the Korg is -10dB....but was VERY frustrated to find that I cannot use the software boost in cuemix.
Is there any way around this???
I really would like to skip messing with the jumpers seeing as (hopefully) I'll just have to switch them back in a minute or two.
Is there ANY supported configuration software that is compatible with both the 324 card and 10.4???
I would think that since MOTU lags behind apple concerning compatibility and support, they would respect the need for backwards compatibility.
Any advice on this would be welcome!!!
Posted: Sun Dec 09, 2007 2:34 pm
by wohali
Driver version 1.0.8 works fine under 10.4.11. I use it regularly.