MOTUnation.com

Hi guys!
I have DP 4.6 and BFD installed on my G4 dp 1.25 running 10.3.8.
My problem is that I can't see all the outpus of BFD just 3-4.
I am using the all outs(stereo) config.
What is wrong?

thank you all
Yiannis

come on guys !

Is there any help?

Yiannis

There was a detailed explanation by somebody on how to set up multiple outs on this forum a week or so back. I believe the same poster put up the same post over @ OSXAudio.com.

Near the top of this page you will see a link for 'search'.

Click on that and do a quick search, I think you will find what you need.

this topic has been discussed ad nauseum...all you have to do is click on search and type in "bfd outs"

thank you guys but I have allready try a search here and osx and at fxspansion forum.
I have done everything but I still dont see any outputs expept the rewire.
Which version of BFD should I have?All versions support multiouts?

Beta 1.5 build 21 is really cool. The ultra outs don't work yet, but the regular outs do. Fxpansion told me that in a V-rack, the instrument is outs 1-2 then you can add aux tracks and select other outs. When you set up your audio bundles (under studio menu) do the following;
1. create multiple; 2 stereo
2. create multiple; 10 mono
3. In V-rack create instrument; BFD ALL OUTS STEREO
4. Create 12 aux tracks; assign to BFD OUTS starting
with 3-4.
If you have other VI's you may need to drag the outs around on the grid a little, that's the way I had to do it.

Good Luck! (I can't wait to actually make some music with all this #@*%!)

thank you!

All I can see at audio bundles is BFD(all outs) 1-3 and 1-4.

What I am doing wrong?

Beta 1.5 build 21 is really cool. The ultra outs don't work yet, but the regular outs do. Fxpansion told me that in a V-rack, the instrument is outs 1-2 then you can add aux tracks and select other outs. When you set up your audio bundles (under studio menu) do the following;
1. create multiple; 2 stereo
2. create multiple; 10 mono
3. In V-rack create instrument; BFD ALL OUTS STEREO
4. Create 12 aux tracks; assign to BFD OUTS starting
with 3-4.
If you have other VI's you may need to drag the outs around on the grid a little, that's the way I had to do it.

Good Luck! (I can't wait to actually make some music with all this #@*%!)

I am doing all this..with no luck!

Whats wrong?

Like I said, do a search here and over @ OSX Audio

You know, I clicked on "search" and then typed in "bfd outs" and I got 72 posts regarding this topic. Try it.

Hey yiannis, did you read the pdf notes that came with 4.6 ?

Thank you guys for your answers.
BUT.....I have read every post here and at OSX.

No one says why at the audio bundles window I CAN NOT see other BFD outs except 3-4.
At the PDF manual figure 25 shows the audio bundles window and BFD outs 3,4,5,6,7.

I don't see that.

<small>[ August 18, 2005, 07:20 AM: Message edited by: Yiannis ]</small>