MOTUnation.com

greg328 wrote: ↑Wed Aug 31, 2022 10:22 am Thanks HC, all good info. I do run a UA tape emulation on my master bus- but I doubt that’s causing my latency. It’s running off my UA hardware— but I’ll certainly A/B to find out.

Good news , I just ran a mix with the new NI Guitar Rig 6 Apple version and it worked great- seemed like less processor hit and less latency. That’s probably one culprit removed..

Greg.


Sent from my iPhone using Tapatalk

Thanks for connecting with us. This is a current known issue in DP, something our team is working on alongside with Native Instruments to resolve.

Best,
Matt - MOTU

mikehalloran wrote: ↑Sat Aug 27, 2022 8:52 am Every setup seems to have an ideal buffer setting, IMO. DP on my iMP thrives on 32. My buddy’s M4 with Performer Lite on his 2014 Mini works fine with 512 — took awhile for me to find the right balance.

HCMarkus wrote: ↑Wed Sep 28, 2022 5:55 pm

greg328 wrote: ↑Wed Aug 31, 2022 10:22 am Thanks HC, all good info. I do run a UA tape emulation on my master bus- but I doubt that’s causing my latency. It’s running off my UA hardware— but I’ll certainly A/B to find out.

Good news , I just ran a mix with the new NI Guitar Rig 6 Apple version and it worked great- seemed like less processor hit and less latency. That’s probably one culprit removed..

Greg.


Sent from my iPhone using Tapatalk

Just updated to Komplete> Everything seems good (Apple Silicon-Native FX suite is now here) except Guitar Rig 6. AU of Version 6.2.4 is not being located by DP.

Digital Performer has encountered an error.
Mas,1 error reported by Mac Audio Unit Support
Failure: Initialize 275-10868 (-10868)

Re-installed after deleting NI-specified files.
Trashed the Audio Unit Info Each 64 Bit; DP re-scanned and shows AU FX and MFX Versions and VST3 version "Guitar Rig 6", no FX or MFX versions.

AU versions pull same error.
If enabled, VST3 version will open a window when instantiated as a plugin, but displays no data.

EDIT:

Thanks for connecting with us. This is a current known issue in DP, something our team is working on alongside with Native Instruments to resolve.

Best,
Matt - MOTU

greg328 wrote: ↑Sun Aug 28, 2022 9:25 am I’ve got horrible latency on my new Mac Studio ultra, even at small buffer settings.

Mostly heard through live mic input, and virtual instrument MIDI triggering.

I think I’ve gone through and removed all non-Apple Silicon ready plug-in so I’m not in Rosetta 2 mode.

Not sure what’s going on, but pretty disappointing so far.


Sent from my iPhone using Tapatalk

Z car guy wrote: ↑Fri Feb 24, 2023 3:04 pm

HCMarkus wrote: ↑Wed Sep 28, 2022 5:55 pm

greg328 wrote: ↑Wed Aug 31, 2022 10:22 am Thanks HC, all good info. I do run a UA tape emulation on my master bus- but I doubt that’s causing my latency. It’s running off my UA hardware— but I’ll certainly A/B to find out.

Good news , I just ran a mix with the new NI Guitar Rig 6 Apple version and it worked great- seemed like less processor hit and less latency. That’s probably one culprit removed..

Greg.


Sent from my iPhone using Tapatalk

Just updated to Komplete> Everything seems good (Apple Silicon-Native FX suite is now here) except Guitar Rig 6. AU of Version 6.2.4 is not being located by DP.

Digital Performer has encountered an error.
Mas,1 error reported by Mac Audio Unit Support
Failure: Initialize 275-10868 (-10868)

Re-installed after deleting NI-specified files.
Trashed the Audio Unit Info Each 64 Bit; DP re-scanned and shows AU FX and MFX Versions and VST3 version "Guitar Rig 6", no FX or MFX versions.

AU versions pull same error.
If enabled, VST3 version will open a window when instantiated as a plugin, but displays no data.

EDIT:

Thanks for connecting with us. This is a current known issue in DP, something our team is working on alongside with Native Instruments to resolve.

Best,
Matt - MOTU

Hi , Did you get this resolved ? I'm having same issue with Guitar rig 6.2.4 and 6.3 . If I revert back to 6.2.3 it works fine no crash .

Z car guy wrote: ↑Fri Feb 24, 2023 3:04 pm

HCMarkus wrote: ↑Wed Sep 28, 2022 5:55 pm

greg328 wrote: ↑Wed Aug 31, 2022 10:22 am Thanks HC, all good info. I do run a UA tape emulation on my master bus- but I doubt that’s causing my latency. It’s running off my UA hardware— but I’ll certainly A/B to find out.

Good news , I just ran a mix with the new NI Guitar Rig 6 Apple version and it worked great- seemed like less processor hit and less latency. That’s probably one culprit removed..

Greg.


Sent from my iPhone using Tapatalk

Just updated to Komplete> Everything seems good (Apple Silicon-Native FX suite is now here) except Guitar Rig 6. AU of Version 6.2.4 is not being located by DP.

Digital Performer has encountered an error.
Mas,1 error reported by Mac Audio Unit Support
Failure: Initialize 275-10868 (-10868)

Re-installed after deleting NI-specified files.
Trashed the Audio Unit Info Each 64 Bit; DP re-scanned and shows AU FX and MFX Versions and VST3 version "Guitar Rig 6", no FX or MFX versions.

AU versions pull same error.
If enabled, VST3 version will open a window when instantiated as a plugin, but displays no data.

EDIT:

Thanks for connecting with us. This is a current known issue in DP, something our team is working on alongside with Native Instruments to resolve.

Best,
Matt - MOTU

Hi , Did you get this resolved ? I'm having same issue with Guitar rig 6.2.4 and 6.3 . If I revert back to 6.2.3 it works fine no crash .