Posted: Sat Sep 10, 2005 10:03 pm
Automation group deselect priority.
Lets say you have 6 tracks grouped and two of them are pairs that were grouped after the other four tracks.
When you option click the first time, have it keep pairs IOW toggle to the next group. A second option click on same the fader will then select single fader as it does now or add the layer to the second OPT click I don;t care.
_________
'Mutes in solo keep automation mutes' is the way it used to be in v3.12!!!!
Give us a pref if it's such a big deal to have it the way it's now so we can all be happy MOTU.
__________
Would love to see an all new PRO-HD192-24 or 32,(4 or 5 rack spaces), with balanced input trims on the front panel 24 VU's two color, blue & red, for Play and record next to each other on each track. Backlight the level markings so we can see easily this time.
DB25 connectors for balanced audio IO & DB25 for digital AES ports so we can use Lynx AES 16 cards instead of or including the PCI 424s proprietary audio wire port. Will firewire 800 handle 24 or 32 simo IO's at once?, great, throw that in too but keep at least the input XLRs on back panel. DB 25's for balanced audio OP to save room would be fine with me.
Use a low profile USB for communications as an alternitive to audio wire for other DAW software users. Create a built in clock as stable and jitter free as a Big Ben or UA 2192.
NO MIC PRE's, just class A front end line level and fantastic IP/OP clarity using Bur Browns. Get away from the cheap IO chips and tinsel tones for a change. My UA 2192 blows away HD192 sonically.
A new IO which REALLY deals with heating issues and supports +27 headroom OP.
Would love to have MOTU finally include a seperate DP software supported stereo/5.1 monitor OP as well with a light pipe to match Macs light port to record mixes directly to computer. The IO and clock would allow a 44.1 16 bit mix, selectable from the front panel whicl the main session was 24 bit whatever. This would really speed workflow.
The fronta panel would allow switches for sync select manually and auto as it is now plus input output port selections manually or auto from PCI Audio console.
Not too much to ask... hehe
Lets say you have 6 tracks grouped and two of them are pairs that were grouped after the other four tracks.
When you option click the first time, have it keep pairs IOW toggle to the next group. A second option click on same the fader will then select single fader as it does now or add the layer to the second OPT click I don;t care.
_________
'Mutes in solo keep automation mutes' is the way it used to be in v3.12!!!!
Give us a pref if it's such a big deal to have it the way it's now so we can all be happy MOTU.
__________
Would love to see an all new PRO-HD192-24 or 32,(4 or 5 rack spaces), with balanced input trims on the front panel 24 VU's two color, blue & red, for Play and record next to each other on each track. Backlight the level markings so we can see easily this time.
DB25 connectors for balanced audio IO & DB25 for digital AES ports so we can use Lynx AES 16 cards instead of or including the PCI 424s proprietary audio wire port. Will firewire 800 handle 24 or 32 simo IO's at once?, great, throw that in too but keep at least the input XLRs on back panel. DB 25's for balanced audio OP to save room would be fine with me.
Use a low profile USB for communications as an alternitive to audio wire for other DAW software users. Create a built in clock as stable and jitter free as a Big Ben or UA 2192.
NO MIC PRE's, just class A front end line level and fantastic IP/OP clarity using Bur Browns. Get away from the cheap IO chips and tinsel tones for a change. My UA 2192 blows away HD192 sonically.
A new IO which REALLY deals with heating issues and supports +27 headroom OP.
Would love to have MOTU finally include a seperate DP software supported stereo/5.1 monitor OP as well with a light pipe to match Macs light port to record mixes directly to computer. The IO and clock would allow a 44.1 16 bit mix, selectable from the front panel whicl the main session was 24 bit whatever. This would really speed workflow.
The fronta panel would allow switches for sync select manually and auto as it is now plus input output port selections manually or auto from PCI Audio console.
Not too much to ask... hehe
