Page 12 of 12
Re: How many folks are using DP Mixerless?
Posted: Sat Jan 09, 2010 9:27 am
by wylie1
Thanx again Buzzy:
I'm hoping to have everything back up and running by tomorrow.
I'm a little intimidated by Cuemix.
Re: How many folks are using DP Mixerless?
Posted: Mon Jan 11, 2010 9:40 am
by wylie1
HCMarkus wrote:wylie1 wrote:HCMarkus wrote:Presonus Digimax FS
I thought I've look at everything.
This is what I've been looking for.
Thanx to everyone for posting details I've learned allot here.
I clock my 828 from the FS using the wordclock. A short BNC cable is all that is required. I use the FS I/O as my primary I/O, and it sounds very good.
I'm trying to use the FS as a clock for my 2408km3 but can't seam to get it working.
What setting do I have to change?
I have BNC out on the FS to BNC in on the 2408
Re: How many folks are using DP Mixerless?
Posted: Mon Jan 11, 2010 11:43 am
by danworks
wylie1 wrote:I'm trying to use the FS as a clock for my 2408km3 but can't seam to get it working. What setting do I have to change? I have BNC out on the FS to BNC in on the 2408
On DP hardware setup you must set the sync from internal to WC.
Disclaimer: I'm on train, not in front DP, but it should work afair 
Re: How many folks are using DP Mixerless?
Posted: Mon Jan 11, 2010 4:03 pm
by wylie1
I'm still missing something.
If I plug into channel 1 on the FS I get a light to bank b on the front of the 2408.
But when I add a track in DP all I see is analog 1-8 I don't see the FS which I assume would show up as ADAT 1-8.
Is that right?
Re: How many folks are using DP Mixerless?
Posted: Mon Jan 11, 2010 7:36 pm
by bzfoto
BOTH, depends on size and situation.
Re: How many folks are using DP Mixerless?
Posted: Tue Jan 12, 2010 4:45 pm
by wylie1
O happy joy I've got everything back on line.
Thanx for all the support I never would have made a change like this with out it.
My brain is still num from working with Cuemix but I can see how it can be used to patch through all kinds of outboard gear.
I thought my system was quite before but now its just crystal clear.
Bye Bye mixer.
