Page 2 of 2
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Tue Jul 11, 2023 7:08 pm
by mothra
Are you expecting the audio to come from the Main Outputs? Cause that's not how you have the interface setup...
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Tue Jul 11, 2023 11:13 pm
by 38Nic
And how should I set it?
Thanks
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Wed Jul 12, 2023 9:54 am
by 38Nic
Hi,
any news about it?
Thank you
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Wed Jul 12, 2023 12:55 pm
by mikehalloran
These controls should not be active when your interface is — yours are, however.
![Screenshot 2023-07-12 at 12.51.13 PM.png](./download/file.php?id=780&sid=cc2df4f92dc8aed705d8fba794cdd4d1)
- Screenshot 2023-07-12 at 12.51.13 PM.png (817.83 KiB) Viewed 38862 times
Take a look at the Input tab. Is the 828 selected there?
Why is the Audient showing as On? That may be your trouble. Turn it off, reboot and see what happens.
![Screenshot 2023-07-12 at 12.55.47 PM.png](./download/file.php?id=781&sid=cc2df4f92dc8aed705d8fba794cdd4d1)
- Screenshot 2023-07-12 at 12.55.47 PM.png (744.36 KiB) Viewed 38861 times
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Wed Jul 12, 2023 1:59 pm
by 38Nic
Ok, removed Audient and restarted, now it's like this, but I don't hear any audio
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Wed Jul 12, 2023 2:06 pm
by 38Nic
Here's how it's set up
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Wed Jul 12, 2023 2:15 pm
by 38Nic
And the connections, firewire, and two cables from analog outputs 1 and 2 to the monitors
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Thu Jul 13, 2023 6:30 am
by 38Nic
HI,
Can anyone please give me advice on how to setup the card for the audio problem?
Thanks
Nic
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Thu Jul 13, 2023 10:31 am
by 38Nic
HI,
I would be grateful if someone can help me, unfortunately I also tried to buy and use the adapter from firewire to thunderbolt 2 and from thunderbolt to thunderbolt 3 (usb-c) by connecting it to the usb-c port of the pc. In this case the Motu is not really seen.
Can anyone please recommend me a solution?
Thank you
Nic
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Thu Jul 13, 2023 11:35 am
by 38Nic
Using the adapters the Motu is not seen
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Fri Jul 14, 2023 12:51 am
by 38Nic
HI,
Has anyone had the same problem? How did it solve?
Thank you
Nic
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Sat Jul 15, 2023 7:34 am
by 38Nic
No help guys?
Thanks
Nic
Re: Motu 828 Mk3 Firewire and Ventura
Posted: Wed Jul 19, 2023 5:26 am
by 38Nic
HI,
I can't get out,
Can you at least tell me if the outgoing and incoming connections are correct?
I have two jack cables that come out from analog out 1 and analog out 2 and go to my speakers. That's all for now, how should Motu Audio Setup be set?
Thanks
Nic