Motu 828 Mk3 Firewire and Ventura
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
- mothra
- Posts: 336
- Joined: Fri Oct 15, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Fontana, CA
- Contact:
Re: Motu 828 Mk3 Firewire and Ventura
Are you expecting the audio to come from the Main Outputs? Cause that's not how you have the interface setup...
M2 Pro Mini, macOS 14, MOTU 828x/Ferrofish Pulse 16, Cubase Pro/MPC
Re: Motu 828 Mk3 Firewire and Ventura
And how should I set it?
Thanks
Thanks
Re: Motu 828 Mk3 Firewire and Ventura
Hi,
any news about it?
Thank you
any news about it?
Thank you
- mikehalloran
- Posts: 15407
- Joined: Sun Jan 25, 2009 5:08 pm
- Primary DAW OS: MacOS
- Location: Sillie Con Valley
Re: Motu 828 Mk3 Firewire and Ventura
These controls should not be active when your interface is — yours are, however.
Take a look at the Input tab. Is the 828 selected there?
Why is the Audient showing as On? That may be your trouble. Turn it off, reboot and see what happens.
Take a look at the Input tab. Is the 828 selected there?
Why is the Audient showing as On? That may be your trouble. Turn it off, reboot and see what happens.
DP 11.31; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.5 b4, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.5 b4, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
Re: Motu 828 Mk3 Firewire and Ventura
Ok, removed Audient and restarted, now it's like this, but I don't hear any audio
- Attachments
-
- IMG_5780.jpeg (2.28 MiB) Viewed 38857 times
Re: Motu 828 Mk3 Firewire and Ventura
Here's how it's set up
- Attachments
-
- IMG_5784.jpeg (4.57 MiB) Viewed 38849 times
-
- IMG_5783.jpeg (3.4 MiB) Viewed 38849 times
-
- IMG_5782.jpeg (4.24 MiB) Viewed 38849 times
Re: Motu 828 Mk3 Firewire and Ventura
And the connections, firewire, and two cables from analog outputs 1 and 2 to the monitors
- Attachments
-
- IMG_5787.jpeg (2.15 MiB) Viewed 38842 times
-
- IMG_5786.jpeg (2.14 MiB) Viewed 38842 times
-
- IMG_5785.jpeg (2.79 MiB) Viewed 38842 times
Re: Motu 828 Mk3 Firewire and Ventura
HI,
Can anyone please give me advice on how to setup the card for the audio problem?
Thanks
Nic
Can anyone please give me advice on how to setup the card for the audio problem?
Thanks
Nic
Re: Motu 828 Mk3 Firewire and Ventura
HI,
I would be grateful if someone can help me, unfortunately I also tried to buy and use the adapter from firewire to thunderbolt 2 and from thunderbolt to thunderbolt 3 (usb-c) by connecting it to the usb-c port of the pc. In this case the Motu is not really seen.
Can anyone please recommend me a solution?
Thank you
Nic
I would be grateful if someone can help me, unfortunately I also tried to buy and use the adapter from firewire to thunderbolt 2 and from thunderbolt to thunderbolt 3 (usb-c) by connecting it to the usb-c port of the pc. In this case the Motu is not really seen.
Can anyone please recommend me a solution?
Thank you
Nic
Re: Motu 828 Mk3 Firewire and Ventura
Using the adapters the Motu is not seen
- Attachments
-
- IMG_5788.jpeg (6.83 MiB) Viewed 38789 times
Re: Motu 828 Mk3 Firewire and Ventura
HI,
Has anyone had the same problem? How did it solve?
Thank you
Nic
Has anyone had the same problem? How did it solve?
Thank you
Nic
Re: Motu 828 Mk3 Firewire and Ventura
No help guys?
Thanks
Nic
Thanks
Nic
Re: Motu 828 Mk3 Firewire and Ventura
HI,
I can't get out,
Can you at least tell me if the outgoing and incoming connections are correct?
I have two jack cables that come out from analog out 1 and analog out 2 and go to my speakers. That's all for now, how should Motu Audio Setup be set?
Thanks
Nic
I can't get out,
Can you at least tell me if the outgoing and incoming connections are correct?
I have two jack cables that come out from analog out 1 and analog out 2 and go to my speakers. That's all for now, how should Motu Audio Setup be set?
Thanks
Nic
- Attachments
-
- Screenshot 2023-07-19 alle 14.26.09.png (75.86 KiB) Viewed 38627 times